拉伸流场诱导聚丙烯/聚乙烯结构性能演变
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家重点研发计划(2019YFC1908200);中国博士后科学基金(2019M652883)


Structural and Properties Evolution of Immiscible Polypropylene/Polyethylene Blended Under Elongational Flow
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    相容性是阻碍废旧塑料高质高值回收的主要问题。文中采用自行研制偏心转子挤出机所提供的拉伸流场,以常用的PP和PE为研究对象,研究拉伸流场作用下PP/PE不相容体系结构性能演变行为,着重考察偏心转子挤出机加工转速和PP/PE组分比的影响。通过扫描电镜证明了拉伸流场可以诱导PP/PE不相容体系形成类蜂窝结构,并建立了结构演变规律。通过对制品力学性能的表征,证明了拉伸流场可以有效实现PP/PE的物理强制增容,并阐明了拉伸强度与拉伸流场强度和PP/PE组分比的关系。该文可以为聚合物不相容体系的物理强制增容提供理论和实验支撑,也可以为废旧塑料污染提供一条切实可行的高质、无污染、低成本回收路线。

    Abstract:

    The miscibility issue is considered to be the top problem in the high-value recycling of waste polymers. In this work, by utilizing a self-made eccentric rotor extruder to supply elongational flow, the structural and properties evolution of PP/PE composites were studied. The effect of the rotation speeds and compositions was analyzed. Through SEM, it is confirmed that the elongational flow can force the immiscible PP/PE blends presenting a novel honeycomb structure. The tensile tests also reveal that PP/PE blends can be compatibilized by elongational flow. Moreover, the relationships between rotation speed, composition and structure, tensile strength of PP/PE blends were established. This work can supply several fundamental knowledge of the physical compatibilization of immiscible polymers, and also can pave a new avenue towards the high-value, low-cost and environmental-friendly recycling of waste polymers.

    参考文献
    相似文献
    引证文献
引用本文

黄照夏, 瞿金平.拉伸流场诱导聚丙烯/聚乙烯结构性能演变[J].高分子材料科学与工程,2021,37(1):8-15. Zhaoxia Huang, Jinping Qu. Structural and Properties Evolution of Immiscible Polypropylene/Polyethylene Blended Under Elongational Flow[J]. Polymer Materials Science & Engineering,2021,37(1):8-15.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2021-03-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司