碳纤维表面生长聚合物微球同时提高界面强度和韧性
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

先进成形技术与装备国家重点实验室开放基金(SKL2019001)


Simultaneous Improvement of Interfacial Strength and Toughness Between Carbon Fiber and Epoxy by In-Situ Growing Clickable Polymer Particles from Surface
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    碳纤维(CF)增强聚合物基复合材料(CFRPC)的界面性能是影响其性能和使用的关键因素,提高界面黏附强度常带来界面韧性损失。文中提出在CF表面进行点击分散聚合,原位生长功能聚合物粒子,同时提高CF-环氧复合材料界面强度和韧性。首先利用多巴胺(DA)对CF进行预处理,然后借助CF表面PDA,室温下进行巯基(-SH)-环氧(-Epoxy)在异丙醇或巯基(-SH)-异氰酸酯(-NCO)在乙醇中的原位点击分散聚合。扫描电镜(SEM)观察到,随单体用量增加,CF表面生长聚合物粒子增大、增多;红外光谱分析表明,使用等摩尔、高浓度单体,或使用过量-SH或-NCO单体,所得CF表面粒子含有残留-SH或-NCO基团,并可进一步功能化;动态接触角测试表明,单体用量增加,CF表面长出的聚合物粒子增多,表面接触角下降,表面能上升;微滴脱黏测试和SEM断面观察证实,长有粒子的CF与环氧基材的界面剪切强度和断裂韧性同时提高。

    Abstract:

    The interfacial properties between carbon fiber and polymer matrix are critical to the applications of carbon fiber reinforced polymer composites (CFRPC). Generally, improving the interfacial strength sacrifices the interfacial toughness. Herein, to make composites simultaneously possess high interfacial strength and toughness, clickable polymer particles were in-situ grown from carbon fiber surface by thiol-epoxide and thiol- isocyanate click dispersion polymerizations in presence of carbon fiber. SEM observations indicate that using more monomers in dispersion polymerizations, more and big particles are grown from carbon fiber. FT-IR analysis reveal that functional groups of -SH and -NCO are incorporated on particles by adding a high content of monomers, or by varying initial feed ratios of monomers. Dynamic contact angle measurements show an obvious decrease of contact angels with water and diiodomethane, and a corresponding increase of surface energy, using carbon fibers with more particles attached on surface. Micro-debonding evaluation and SEM observations on fracture surface demonstrate the simultaneous improvement of interfacial shear strength and fracture toughness between carbon fiber and epoxy resin with the particles grown on fiber surface.

    参考文献
    相似文献
    引证文献
引用本文

蒋兴宇, 王 正, 刘慧敏, 钟美华, 刘莲英, 任明伟, 杨万泰.碳纤维表面生长聚合物微球同时提高界面强度和韧性[J].高分子材料科学与工程,2021,37(1):16-23. Xingyu Jiang, Zheng Wang, Huiming Liu, Meihua Zhong, Lianying Liu, Mingwei Ren, Wantai Yang. Simultaneous Improvement of Interfacial Strength and Toughness Between Carbon Fiber and Epoxy by In-Situ Growing Clickable Polymer Particles from Surface[J]. Polymer Materials Science & Engineering,2021,37(1):16-23.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2021-03-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司