聚对苯二甲酸异山梨醇/乙二醇共聚酯及其熔纺纤维性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

教育部“创新团队发展计划”滚动支持(IRT16R13); 上海市优秀学术/技术带头人计划(20XD1433700); 上海市“一带一路”国际合作项目(20520740800); 中国博士后科学基金(2019M661323, 2020TQ0062)


Properties of Polyisosorbide/ethylene Terephthalate Copolyester and Its Melt-Spun Fiber
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过三元共聚将生物基异山梨醇(Is)引入到聚对苯二甲酸乙二醇酯(PET)的分子链中,制备了系列聚对苯二甲酸异山梨醇/乙二醇共聚酯(PEIT)。进一步熔融纺丝获得了PEIT纤维。利用核磁共振波谱仪、凝胶渗透色谱、差示扫描量热仪、热重分析仪、X射线衍射仪及纤维强力仪分析研究了PEIT共聚酯的结构和性能。结果表明,Is刚性单元显著提高了PEIT的玻璃化转变温度(Tg),保持了共聚物良好的热稳定性;同时破坏了分子链的规整性,使其结晶度有所降低。PEIT具有良好的可纺性,Is摩尔分数为5%时,PEIT纤维具有优异的力学性能,断裂强度较PET纤维增加了45%;仅当Is摩尔分数高于40%时,可拉伸性下降。

    Abstract:

    Bio-based isosorbide (Is) was introduced into the molecular chains of polyethylene terephthalate (PET) through ternary copolymerization to prepare a series of polyethylene terephthalate/ethylene glycol copolyesters (PEIT). PEIT fibers were further prepared by melt spinning. The structure and properties of polyester were investigated by nuclear magnetic resonance spectrometer (NMR), gel chromatography (GPC), differential scanning calorimeter (DSC), thermogravimetric analysis (TG), X-ray diffractometer (XRD) and fiber strength analysis. The results show that the Is rigid units significantly increase the glass transition temperature (Tg) of PEIT and maintain the good thermal stability of the copolymer; meanwhile, the regularity of the molecular chains is destroyed, the crystallinity is reduced. PEIT has good spinnability. When the Is molar fraction is 5%, PEIT fibers have excellent mechanical properties, and the breaking strength is 45% higher than that of PET fiber; only when the Is molar fraction is higher than 40%, the stretchability is decreased.

    参考文献
    相似文献
    引证文献
引用本文

朱青青, 周家良, 潘伟楠, 相恒学, 胡泽旭, 朱美芳.聚对苯二甲酸异山梨醇/乙二醇共聚酯及其熔纺纤维性能[J].高分子材料科学与工程,2021,37(1):24-31. Qingqing Zhu, Jialiang Zhou, Weinan Pan, Hengxue Xiang, Zexu Hu, Meifang Zhu. Properties of Polyisosorbide/ethylene Terephthalate Copolyester and Its Melt-Spun Fiber[J]. Polymer Materials Science & Engineering,2021,37(1):24-31.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2021-03-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司