丁基橡胶的结构对硫化胶疲劳性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

青岛市博士后应用研究项目;国家自然科学基金资助项目(51972185)


Influence of Raw Rubber Structure on Fatigue Properties of Butyl Rubber Vulcanizate
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    橡胶的机械疲劳过程复杂,影响因素众多。文中对不同微观结构的丁基橡胶进行室温屈挠龟裂实验,应用红外光谱仪和场发射扫描电子显微镜,分析了硫化胶屈挠疲劳前后分子链结构和微观形貌的变化。实验结果表明,不饱和度高的丁基橡胶硫化速度较快,屈挠过程中硫化胶表面热氧老化程度较高;相对分子质量相近的2种丁基橡胶不饱和度高的硫化胶的抗机械疲劳性能较好;屈挠龟裂过程中异相颗粒处的应力集中是导致形成龟裂裂纹的主要原因。

    Abstract:

    The rubber mechanical fatigue process is very complicated, and there are many influencing factors. In this paper, flex cracking experiments were carried out on butyl rubber with different molecular chain structures at room temperature. Using FT-IR and SEM, the changes of the molecular chain structures and microscopic morphologies of vulcanized rubber were analyzed before and after the flexural mechanical fatigue. The experimental results show that the butyl rubber with higher unsaturation will vulcanize and age by thermal oxygen faster. When the molecular weight of the butyl rubber is equivalent, the vulcanizate of butyl rubber with higher unsaturation has better mechanical fatigue resistance. On the other hand, the stress concentration at the heterogeneous particles is the main factor causing the formation of cracks during the flex cracking process.

    参考文献
    相似文献
    引证文献
引用本文

何丽霞, 瞿金磊, 刘 莉, 刘光烨, 刘福胜, 马 骥, 孙立水.丁基橡胶的结构对硫化胶疲劳性能的影响[J].高分子材料科学与工程,2021,37(1):81-87. Lixia He, Jinlei Qu, Li Liu, Guangye Liu, Fusheng Liu, Ji Ma, Lishui Sun. Influence of Raw Rubber Structure on Fatigue Properties of Butyl Rubber Vulcanizate[J]. Polymer Materials Science & Engineering,2021,37(1):81-87.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2021-03-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司