双酚A-聚碳酸酯湿热老化链内/链端水解反应机理的粗粒化分子动力学-动力学蒙特卡洛模拟
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金重大项目(51790504)


Coarse-Grained Molecular Dynamics-Kinetic Monte Carlo Simulation of Intrachain/Chain-End Hydrolysis Mechanism in the Hydrothermal Aging of Bisphenol A-Polycarbonate
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    提出了用粗粒化分子动力学与动力学蒙特卡洛相结合的模拟方法(C-K方法),在较大空间和时间尺度下研究了不同初始聚合度及水含量的聚碳酸酯(PC)的湿热老化规律及链内/链端水解分子机理。发现在多数条件下PC的水解反应主要发生在链内,且链内水解位置多位于距链端2~20聚合度处,这可能与链内反应位点远多于链端有关。降低PC的初始聚合度使得老化前期链端水解比例上升,在一定范围内降低PC的水含量则对链端/链内水解机理影响不大。

    Abstract:

    A new simulation method (C-K method) combining coarse-grained molecular dynamics with kinetic Monte Carlo was proposed to study the hydrothermal aging and the intrachain/chain-end hydrolytic mechanism of polycarbonate (PC) in a large space and time scale. The results show that in most cases, the intrachain hydrolysis of PC chains dominates. The location of intrachain hydrolysis mainly locates at the polymerization degrees of 2~20 from the chain-end, which may be related to the fact that the number of hydrolysis sites at intrachain is much larger than that at the chain-end. Decreasing the initial degree of polymerization of PC chains will increase the hydrolysis ratio of chain end at the early stage of aging. However, decreasing the water content within a certain range will have little effect on the hydrolysis mechanism.

    参考文献
    相似文献
    引证文献
引用本文

胡 平, 刘 强, 黄亚江, 李光宪.双酚A-聚碳酸酯湿热老化链内/链端水解反应机理的粗粒化分子动力学-动力学蒙特卡洛模拟[J].高分子材料科学与工程,2021,37(1):109-117. Ping Hu, Qiang Liu, Yajiang Huang, Guangxian Li. Coarse-Grained Molecular Dynamics-Kinetic Monte Carlo Simulation of Intrachain/Chain-End Hydrolysis Mechanism in the Hydrothermal Aging of Bisphenol A-Polycarbonate[J]. Polymer Materials Science & Engineering,2021,37(1):109-117.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2021-03-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司