形状记忆聚氨酯/碳纳米管复合材料在形状记忆和热处理过程中导电性能变化
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

科技部重点研发计划政府间国际科技创新合作重点专项(2017YFE0111500)


Evolution of Carbon Nanotubes Conductive Networks of Carbon Nanotubes/Shape Memory Polyurethane Composites During Shape Memory and Thermal Treatment Process
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用溶液混合结合密炼的方法制备了碳纳米(CNTs)/形状记忆聚氨酯导电复合材料。电镜照片显示,CNTs在聚氨酯基体中分散均匀。该材料具有良好的导电性能,添加3%的碳管,材料导电率可达4.6 s/m,逾渗阈值仅为0.99%。加入碳管没有损害材料的形状记忆性能,碳管质量分数为3%时,材料的形状固定率为~94%,恢复率为~87%。文中在线研究了该材料在形状记忆(拉伸-固位-恢复)和高温热处理过程中材料电阻的变化。通过改变拉伸次数、变形温度、拉伸速率和拉伸长度等条件,系统研究形状记忆过程中材料的电阻变化规律,发现复合材料的电阻随拉伸应变的增加而增大,但电阻并不随变形的恢复而降低,而是在回复过程中继续增加。最后,可以通过高温热处理,使材料的电阻恢复到接近拉伸前的值。在此基础上解释了形状记忆过程和热处理中CNTs导电网络可能产生的变化以及驱动力。

    Abstract:

    Carbon nanotubes (CNTs)/shape memory polyurethane (SMA) conductive composites were prepared by a combination of solution blending and melt mixing. The SEM images show that CNTs are dispersed uniformly in the polyurethane matrix. The shape memory material shows good electrical conductivities and the percolation threshold is only 0.99%. The conductivity of the material can reach 4.6 s/m,when 3% CNTs are added. At the same time, the addition of CNTs does not damage the shape memory properties of the materials. When the CNTs mass fraction is 3%, the shape fixation rate of the composite material is 94%, and the shape recovery rate is 87%. The change of electrical resistance of the material during shape memory process (stretching-fixing-recovery) and high temperature heat treatment was studied on-line. By changing the stretching times, temperature, rate and length, the change of resistance in the process of shape memory was systematically studied. The results show that the electrical resistance of the composite material increases with the increase of tensile strain, but the electrical resistance does not decrease with the recovery of deformation, but continuously increases during the recovery process. Finally, the resistance of the material can be restored to the value close to that before stretching by high temperature heat treatment. On this basis, the possible changes and driving forces of carbon nanotube conductive network in the process of shape memory and heat treatment were described.

    参考文献
    相似文献
    引证文献
引用本文

费国霞, 龚启春, 夏和生.形状记忆聚氨酯/碳纳米管复合材料在形状记忆和热处理过程中导电性能变化[J].高分子材料科学与工程,2021,37(1):128-133. Guoxia Fei, Qichun Gong, Hesheng Xia. Evolution of Carbon Nanotubes Conductive Networks of Carbon Nanotubes/Shape Memory Polyurethane Composites During Shape Memory and Thermal Treatment Process[J]. Polymer Materials Science & Engineering,2021,37(1):128-133.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2021-03-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司