Abstract:Natural rubber has a damping hysteresis phenomenon, which causes it to generate heat during recycling and accelerates its aging. The different coagulation processes of natural latex have important influence on the construction of rubber network structure, which further affects its thermogenesis performance. In this paper, the network structure of natural coagulation (NR-n), microbial coagulation (NR-m), and formic acid coagulated natural rubber (NR-a) was analyzed by NMR cross-link density meter and tube model theory, and explored the relationship between the rubber network structure and its thermogenesis performance. The results show that the external heat generation of NR-n and NR-m are 8.5 ℃ and 8.9 ℃, respectively, which are lower than 13.8 ℃ of NR-a. The internal heat generation of NR-n and NR-m are 17.6 ℃ and 16.7 ℃, respectively, which are lower than 26.6 ℃ of NR-a. The reason for the difference in heat generation is that the density of cross-linking and entanglement points of NR-n and NR-m are higher than those of NR-a, which results in an enhanced rigidity of the vulcanization networks. At the same stress, the movement trend of NR-n and NR-m molecular chains is smaller, the heat dissipation is less, and the thermogenesis is lower. Research shows that the natural coagulation and microbial coagulation of natural rubber vulcanization networks have the better compactness, as a result, their thermogenesis performance is significantly better than acetic acid coagulated natural rubber.