耐高温乙炔基封端聚酰亚胺的制备与性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Synthesis and Properties of Acetylene-Terminated Polyimide with High Thermal Resistant
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    基于单体4-苯基醚-1,3-二胺制备了一种新型乙炔基封端热固性聚酰亚胺。利用傅里叶变换红外光谱仪、核磁共振氢谱仪和X射线衍射仪对其结构进行表征,其结果表明制备得到了相应结构的预聚体。利用差示扫描量热仪测得预聚体的玻璃化转变温度(Tg)仅为155 ℃。预聚体在有机溶剂中具有高的溶解性,常温下在N-甲基吡咯烷酮中的溶解度高于50%。熔体黏度测试表明,预聚体的最低熔体黏度在237 ℃时为47.5 Pa·s。动态力学热分析仪测试表明,交联固化后树脂的Tg值高达335 ℃,具有非常高的耐温性。热失重曲线表明,该种热固性聚酰亚胺树脂具有高的热分解稳定性,在空气中5%热失重温度为535 ℃,氮气中800 ℃的残炭率为57%。

    Abstract:

    The acetylene terminated thermosetting polyimide was prepared with monomer 4-phenyl ether-1,3-diamine. The structure was characterized by FT-IR, 1H-NMR and XRD. The results show that the corresponding structure of oligomer is obtained. The Tg of oligomer is only 155 ℃ measured by DSC. The Tg of cured resin was as high as 335 ℃ measured by DMA, indicating the high thermal resistant. The oligomer possesses the high solubility in organic solvents. The solubility of oligomer is more than 50% in N-methylpyrroxone. The minimum melt viscosity of oligomer is 47.5 Pa·s at 237 ℃ by rheometer. The thermosetting polyimide possesses the high thermal stability by TGA. The temperature of 5% mass loss in air is 535 ℃, and the residual yield at 800 ℃ is 57%.

    参考文献
    相似文献
    引证文献
引用本文

宇 平, 司政凯, 薛敏钊, 刘燕刚, 王 巍.耐高温乙炔基封端聚酰亚胺的制备与性能[J].高分子材料科学与工程,2021,37(2):35-40. Ping Yu, Zhengkai Si, Minzhao Xue, Yangang Liu, Wei Wang. Synthesis and Properties of Acetylene-Terminated Polyimide with High Thermal Resistant[J]. Polymer Materials Science & Engineering,2021,37(2):35-40.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2021-05-06
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司