异噻唑啉酮微胶囊的制备表征及释放行为
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Preparation, Characterization and Sustained Release Behavior of Isothiazolinone Microcapsules
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以二异氰酸酯(TDI)、聚乙二醇4000(PEG)、二羟甲基丙酸(DMPA)和三乙胺(TEA)为原料,制备可水乳化的聚氨酯(WPU)。以合成的WPU为囊壁、以异噻唑啉酮衍生物(Sea-nine 211)为囊芯,通过乳化自组装得到防污剂Sea-nine 211微胶囊,用红外光谱、粒径分布和扫描电镜对胶囊进行表征,并采用分光光度法研究壁芯比对微胶囊释放行为的影响,进而研究壁芯比对微胶囊缓释动力学的影响。结果表明成功制备了规整球形的异噻唑啉酮微胶囊;微胶囊粒径分布较宽,主要分布在91~960 nm,268~610 nm的微胶囊约占84.1%,平均粒径为460.9 nm;随着壁芯比的减小,扩散速率常数增大,达到平衡时所用时间缩短,微胶囊缓释性变差。

    Abstract:

    Waterborne polyurethanes (WPUs) as capsule wall were designed and synthesized with diisocyanate, polyethylene glycol, dimethylpropionic acid and triethylamine. Isothiazolinone microcapsules were prepared by self-emulsifying method. FT-IR, laser particle size analyzer and SEM were used to characterize the isothiazolinone microcapsules. The effects of wall/core mass ratio on the release behavior of microcapsules were studied by UV-vis spectrophotometry and the sustained release kinetics of microcapsules were further studied. The SEM images and particle diameter measurements show that the microcapsules are regularly global particles, the particle sizes are mainly between 91~960 nm, microcapsules between 268~610 nm account for about 84.1% and the average particle size is 460.9 nm; the curve-fitting results show that the release of isothiazolinone in the microcapsules basically accords with the derived diffusion equation, and the diffusion rate constant increases as the wall/core mass ratio reduces.

    参考文献
    相似文献
    引证文献
引用本文

刘明光, 刘 宇, 赵 茹.异噻唑啉酮微胶囊的制备表征及释放行为[J].高分子材料科学与工程,2021,37(2):49-53.]Mingguang Liu, Yu Liu, Ru Zhao. Preparation, Characterization and Sustained Release Behavior of Isothiazolinone Microcapsules[J]. Polymer Materials Science & Engineering,2021,37(2):49-53.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2021-05-06
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司