端乙烯基氨酯树脂阻尼材料的合成与表征
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

**科研计划项目;**装计(2016) 757号文;**科研计划项目(HJ20191A080365)


Synthesis and Characterization of Vinyl Terminated Urethane Resin Damping Materials
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用聚氧化丙烯二醇(PPG2000)、2,4-甲苯二异氰酸酯(TDI)合成聚氨酯预聚物,用甲基丙烯酸羟乙酯(HEMA)封端得到端乙烯基氨酯树脂(VTUR),加入苯乙烯(St)交联剂,用过氧化氢异丙苯(CHP)、过氧化甲乙酮(MEKP)2种固化剂制备了不同苯乙烯含量的弹性体。分析了VTUR的合成情况,以及苯乙烯含量对树脂黏度的影响趋势;探讨了苯乙烯用量及固化剂种类对弹性体阻尼性能和力学性能的影响规律。结果表明,成功合成了VTUR,且苯乙烯的加入使树脂黏度大幅降低;随着苯乙烯含量的提高,弹性体的阻尼峰值逐渐升高且峰温向高温方向偏移,力学强度呈增大的趋势;由CHP固化剂制备的弹性体阻尼性能优于MEKP固化剂。

    Abstract:

    Polyurethane propylene glycol(PPG2000) and 2,4-toluene diisocyanate (TDI) were used to synthesize a polyurethane prepolymer, which was capped with hydroxyethyl methacrylate (HEMA) to obtain a vinyl terminated urethane resin (VTUR). Styrene (St) as cross-linking monomer was added. Elastomers with different styrene contents were prepared with two curing agents, cumene hydrogen peroxide (CHP) and methyl ethyl ketone peroxide (MEKP). The synthesis of VTUR was analyzed, the influence of styrene content on the viscosity of the resins, and the influence of the amount of styrene and the type of curing agent on the damping and mechanical properties of the elastomers were also studied. The results show that VTUR was successfully synthesized and the addition of styrene decreases the viscosity of the resins; with the increase of styrene content, the damping peak of the elastomer gradually increases, and the peak temperature shifts to high temperature; the mechanical strength is increased. The elastomers made with CHP curing agent have better damping properties.

    参考文献
    相似文献
    引证文献
引用本文

孙昭宜, 李 瑜, 邓金飞, 饶秋华, 梅志远.端乙烯基氨酯树脂阻尼材料的合成与表征[J].高分子材料科学与工程,2021,37(2):54-60. Zhaoyi Sun, Yu Li, Jinfei Deng, Qiuhua Rao, Zhiyuan Mei. Synthesis and Characterization of Vinyl Terminated Urethane Resin Damping Materials[J]. Polymer Materials Science & Engineering,2021,37(2):54-60.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2021-05-06
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司