炭黑对苯乙烯-丙烯腈共聚物/聚己内酯复合材料流变、力学及电学性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51373157)


Effect of Carbon Black on Rheological, Mechanical and Electrical Properties of Styrene-Acrylonitrile Copolymer/Polycaprolactone Blends
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以苯乙烯-丙烯腈共聚物/聚己内酯(SAN/PCL)复合材料为基体,导电炭黑(CB)为填料,采用熔融共混的方法制备了SAN/PCL/CB纳米复合材料。考察了CB含量对SAN/PCL/CB纳米复合材料流变特性、力学性能、电学性能和微观形貌的影响。结果表明,CB的加入能够诱导体系发生相分离,随着CB含量的增加,SAN/PCL/CB纳米复合材料的储能模量曲线在低频区呈现明显的“第二平台”,表现出明显的凝胶化现象,凝胶点为6.5%。在凝胶点前后,SAN/PCL/CB纳米复合材料的力学和电学性能发生明显变化,表明力学和电学性能均与流变特性具有一定相关性。形态分析表明,CB的加入可有效降低分散相的尺寸,CB的团聚是产生流变逾渗的根本原因。

    Abstract:

    SAN/PCL/CB nanocomposites were prepared through melt blending styrene- acrylonitrile copolymer/polycaprolactone (SAN/PCL) blends with carbon black (CB). The effects of CB content on the rheological properties, mechanical properties, electrical properties and morphologies of SAN/PCL/CB nanocomposites were investigated. The results show that the addition of CB can induce the phase separation. With the increasing of CB content, the storage modulus (G′) curves of SAN/PCL/CB nanocomposites show a clear "second plateau" in the low frequency region, exhibiting the obvious gelation phenomenon, and the gel point is 6.5%. Around the gel point, the mechanical and electrical properties of SAN/PCL/CB nanocomposites change significantly, indicating that both the mechanical and electrical properties have some correlation with the rheological behaviors. Morphological analysis shows that the addition of CB can effectively reduce the sizes of the dispersed phase, and the agglomerations of CB can be attributed to the rheological percolation.

    参考文献
    相似文献
    引证文献
引用本文

吴书航, 乔小勇, 王建峰, 杨艳宇, 曹艳霞, 王万杰.炭黑对苯乙烯-丙烯腈共聚物/聚己内酯复合材料流变、力学及电学性能的影响[J].高分子材料科学与工程,2021,37(2):67-72. Shuhang Wu, Xiaoyong Qiao, Jianfeng Wang, Yanyu Yang, Yanxia Cao, Wanjie Wang. Effect of Carbon Black on Rheological, Mechanical and Electrical Properties of Styrene-Acrylonitrile Copolymer/Polycaprolactone Blends[J]. Polymer Materials Science & Engineering,2021,37(2):67-72.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2021-05-06
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司