短纤维增强橡胶密封复合材料界面疲劳损伤行为
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51705037);江苏省高等学校自然科学研究项目(17KJB130001,19KJB130002);第十六批“六大人才高峰”高层次人才项目(GDZB-063);新引进教师科研启动基金(XZ1633)


Interfacial Fatigue Damage Behavior of Short Fiber Reinforced Rubber Sealing Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    依据广义自洽方法,建立了包含芳纶纤维、界面相、橡胶基体和等效介质的代表性体积单元(RVE)模型。采用自定义材料子程序对内聚力疲劳累积损伤模型进行编译,分别在基体/界面相的界面和纤维/界面相的界面设置内聚力单元,研究界面相性能参数对纤维增强橡胶密封复合材料(SFRC)界面疲劳损伤行为的影响。探讨了界面相厚度和模量的确定方法,获得了不同界面相厚度和模量下SFRC界面脱粘起始位置以及脱粘起始疲劳次数。结果表明,较低的界面相模量能够抑制界面脱粘的产生;随着界面相厚度的增加,界面脱粘的起始疲劳次数增加,SFRC抗疲劳损伤能力得到提高。

    Abstract:

    The representative volume element (RVE) model composed of aramid fibers, interphase, rubber matrix and equivalent medium was established based on generalized self-consistent method. The self-defined material subroutine (UMAT) was used to compile the cohesive fatigue cumulative damage model. The cohesive elements were set respectively at matrix/interphase (MI) interface and fiber/interphase (FI) interface. The influence of interphase performance parameters on the interfacial fatigue damage behavior of SFRC was studied. The method to determine the thickness and modulus of interphase was investigated. The initial position of the interfacial debonding and the corresponding fatigue number of SFRC were obtained with different interfacial thickness and modulus. The results show that the interfacial debonding of SFRC will be restrained with lower interphase modulus, and the initial fatigue numbers of interfacial debonding of SFRC increase with the increase of interphase thickness. Therefore, the ability to resist the fatigue damage of SFRC can also be improved by increasing the interphase thickness.

    参考文献
    相似文献
    引证文献
引用本文

宇晓明, 张 斌, 顾伯勤.短纤维增强橡胶密封复合材料界面疲劳损伤行为[J].高分子材料科学与工程,2021,37(2):108-115. Xiaoming Yu, Bin Zhang, Boqin Gu. Interfacial Fatigue Damage Behavior of Short Fiber Reinforced Rubber Sealing Composites[J]. Polymer Materials Science & Engineering,2021,37(2):108-115.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2021-05-06
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司