复合材料微细杆增强复合材料研究进展
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51503223);博士后科学基金(2017M623378)


Progress on Research of Z-Pinned Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    纤维增强树脂基复合材料具有轻质高强的特点,但复合材料层合板层间韧性和抗冲击性能差,复合材料微细杆(Z-pin)增强技术极大地改善了这一不足,被广泛应用于各工业制造领域。近年来,Z-pin增强复合材料的制备工艺不断发展,目前主要有热压罐法和超声植入法(UAZ)。Z-pin增强复合材料的层间增韧和抗冲击性能提高效果显著,但其面内拉伸性能、面内压缩性能和疲劳性能稍有下降。文中从Z-pin增强复合材料的性能特点出发,针对其层间韧性、抗冲击性、面内力学性能和疲劳性能进行了综述。指出Z-pin在Ⅰ型断裂模式、Ⅱ型断裂模式和混合断裂模式下的增韧机制;总结了Z-pin在提高复合材料低能量冲击后剩余压缩性能方面的作用;介绍了Z-pin增强复合材料在平面拉伸和压缩载荷下的破坏模式,从纤维损伤角度归纳了其面内拉伸及压缩性能下降的原因;总结了Z-pin增强复合材料在循环压缩载荷下的破坏模式。最后从材料体系和工艺优化两方面出发,为降低纤维损伤提供了建议。对Z-pin增强技术的进一步应用进行了展望。

    Abstract:

    Fiber-reinforced resin matrix composites have the characteristics of light weight and high strength, however the interlayer toughness and impact resistance of composite laminates are poor. The Z-pin enhancement technology has greatly improved this deficiency and has been widely used in various industrial manufacturing fields. In recent years, the preparation processes of Z-pin reinforced composites have been continuously developed, including autoclave process and ultrasonically assisted Z-fibre (UAZ).Z-pin ned composites have significant effects on interlaminar toughening and impact resistance, but the in-plane properties and fatigue properties are slightly reduced. Based on the performance characteristics, the interlayer toughness, impact resistance, in-plane mechanical properties and fatigue properties of Z-pinned composites were introduced. The toughening mechanisms of Z-pinned composites in the mode I interlaminar fracture, the mode II interlaminar fracture and the mixed mode interlaminar fracture were pointed out. The effects of Z-pins taking in improving the residual compression performance of composites after low energy impact were summarized. The failure modes of Z-pinned composites under plane tensile and compressive loads were introduced. The reasons for the loss of in-plane properties were concluded. The failure modes of Z-pinned composites under cyclic compression load were also summarized. Finally, further applications of the Z-pin enhancement technology were prospected.

    参考文献
    相似文献
    引证文献
引用本文

安少杭, 邢素丽, 陈丁丁, 尹昌平, 杨金水.复合材料微细杆增强复合材料研究进展[J].高分子材料科学与工程,2021,37(2):176-183. Shaohang An, Suli Xing, Dingding Chen, Changping Yin, Jinshui Yang. Progress on Research of Z-Pinned Composites[J]. Polymer Materials Science & Engineering,2021,37(2):176-183.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2021-05-06
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司