Abstract:Multi-walled carbon nanotubes grafted poly (N-isopropylacrylamide) (MWCNTs-g-PNIPAM) was prepared by mercapto-alkynyl green click chemical reaction graft polymerization initiated by ultraviolet light. Then, polyvinylidene fluoride (PVDF) / MWCNTs-g-PNIPAM composite ultrafiltration membranes incorporating MWCNTs-g-PNIPAM with different PNIPAM grafting degrees were prepared by non-solvent-induced phase separation (NIPS) method. The effects of MWCNTs on the crystallinity and crystallization content of β phase, hydrophilicity, surface and section morphology, tensile strength and elongation at break of ultrafiltration membranes were studied by differential scanning calorimetryand total reflection infrared spectroscopy, water contact angle and water flux, field emission electron microscopy and mechanical tensile tests. The results show that when the graft time is 3 h by photocatalytic photocatalysis, the maximum graft rate of PNIPAM is 9.76%, which improves the interfacial bonding force between the carbon nanotubes and PVDF, so that the carbon nanotubes can meet the hydrophilicity while being well dispersed in the PVDF matrix. Among them, the β-phase crystal content is increased from 68.64% of pure PVDF film to 95.32%, the crystallinity is increased from 46.30% to 57.95%, the tensile strength and elongation at break are increased from 5.37 MPa and 53.2% to 7.85 MPa and 54.32%, respectively , the water contact angle is decreased from 95° to 69.75° and the water flux is increased from 3.18 LMH to 21.68 LMH.