高邻位热固性酚醛基纳米活性炭纤维膜的制备及吸附性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51803245,51973246);河南省高校科技创新人才支持计划(19HASTIT024);河南省高等学校青年骨干教师培养计划(2019GGJS145);中原工学院交叉学科团队支持计划


Preparation and Adsorption Performance of High-Ortho Thermosetting Phenolic Resin Based Activated Carbon Nano Fibers
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以合成的高邻位热塑性酚醛为模板,通过与甲醛的加成反应制备了高邻位热固性酚醛树脂,经溶液静电纺丝、盐酸溶液固化获得了纳米酚醛纤维,最终利用KOH活化获得了高邻位热固性酚醛基纳米活性炭纤维。利用红外光谱、X射线衍射、热重分析和扫描电镜分析了制备物的结构、性能变化,并观察了纳米纤维的表面形貌;通过比表面积和亚甲基蓝(MB)/碘吸附分析了纳米活性炭纤维的孔结构和吸附性能,获得了比表面2606 m2/g、MB吸附量1643.0 mg/g、碘吸附量2731.1 mg/g的高邻位热固性酚醛基纳米活性炭纤维,实现了低污染、高活性纳米炭纤维的制备。

    Abstract:

    The nano phenolic fibers were prepared by the HCl solution curing of phenolic as-spun filaments derived from the electro-spinning of the high-ortho thermosetting phenolic solution, which was synthesized by the reaction between formaldehyde and high-ortho novolac phenolic resin template. Finally, the phenolic based activated carbon nano fibers were fabricated through the activation by KOH. The microscopic structure, thermal properties and fiber morphology were investigated by FT-IR, XRD, TGA, and SEM. The pore structures and absorption performance were characterized by BET and MB/iodine absorption. The specific surface area and MB/iodine absorption quantity are dramatically increased up to 2606 m2/g, 1643.0 mg/g, and 2731.1 mg/g, respectively. Consequently, the high-ortho thermosetting phenolic based activated carbon nano fibers with the absorption activation were prepared through a green method.

    参考文献
    相似文献
    引证文献
引用本文

杨 凯, 贾万顺, 焦明立, 郑 瑾, 刘安斐, 刁 泉, 张彩云, 陈亚慧.高邻位热固性酚醛基纳米活性炭纤维膜的制备及吸附性能[J].高分子材料科学与工程,2021,37(4):143-150. Kai Yang, Wanshun Jia, Mingli Jiao, Jin Zheng, Anfei Liu, Quan Diao, Caiyun Zhang, Yahui Chen. Preparation and Adsorption Performance of High-Ortho Thermosetting Phenolic Resin Based Activated Carbon Nano Fibers[J]. Polymer Materials Science & Engineering,2021,37(4):143-150.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2021-07-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司