反应挤出制备极性共聚聚丙烯热熔胶
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51822305,51673135)


Enhanced Polarity of Polypropylene-Based Hot-Melt Adhesives Prepared by Reactive Extrusion
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    聚丙烯(PP)热熔胶缺乏极性,在粘接极性材料时性能较差。文中使用反应挤出在PP及共聚PP分子链上引入马来酸酐(MAH)基团,提高其极性,获得了PP极性热熔胶。使用多种粘接基材评价了该热熔胶的粘接性能,研究了极性、表面粗糙度、分子链结构对粘接性能的影响。结果表明,反应挤出接枝MAH可以显著提高PP热熔胶与极性材料的粘接能力,并且发现织物样品的剥离强度强于薄膜样品。此外,MAH在共聚PP上的接枝率高于均聚PP,使得共聚PP的剥离强度也较高。

    Abstract:

    Polypropylene (PP)-based hot-melt adhesives show insufficient adhesive performance when applied in polar substrates. In this work, maleic anhydride (MAH) was introduced on the molecular chains of PP and copolymerized PP by reactive extrusion process and polar PP-based hot-melt adhesives were performed. A variety of substrates were utilized to evaluate the adhesive performance of prepared hot-melt adhesives, and the influence of polarity, surface roughness, and molecular chain structure on the adhesion strength was investigated. The results show that graft of MAH via reactive extrusion can significantly improve the adhesion performance of PP hot-melt adhesives to polar materials, and it is also found that the peel strength of the fabric substrate is stronger than that of the film substrate. The graft yield of MAH on copolymerized PP is higher than that of homopolymerized PP, therefore, copolymerized PP exhibit better adhesive performance.

    参考文献
    相似文献
    引证文献
引用本文

李禹善, 陈 缘, 任嘉怡, 徐 玲, 钟淦基, 李忠明.反应挤出制备极性共聚聚丙烯热熔胶[J].高分子材料科学与工程,2021,37(5):1-8. Yushan Li, Yuan Chen, Jiayi Ren, Ling Xu, Ganji Zhong, Zhongming Li. Enhanced Polarity of Polypropylene-Based Hot-Melt Adhesives Prepared by Reactive Extrusion[J]. Polymer Materials Science & Engineering,2021,37(5):1-8.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2021-08-06
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司