聚硅倍半氧烷改性光固化硅橡胶绝热耐烧蚀材料
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Polysiloxane Modified Light Cured Silicone Rubber Thermal Insulation and Ablation Resistant Materials
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以“巯基-双键”交联体系为基础,室温光固化制备了硅橡胶绝热材料,并研究了新型耐烧蚀填料八苯基硅倍半氧烷(OPS)和八乙烯基硅倍半氧烷(OVP)对硅橡胶性能的影响。采用热重分析、力学测试、氧乙炔烧蚀、极限氧指数、锥形量热和扫描电镜对制备的硅橡胶进行了分析。结果表明,OPS和OVP都可以提高硅橡胶的热稳定性和耐烧蚀性,但对力学性能有一定影响。其中,OVP改性的硅橡胶表现出更佳的耐烧蚀性能,含有15 phr OVP的硅橡胶线烧蚀率为0.121 mm/s,相比纯硅橡胶降低了84.8%。添加OPS和OVP都能够显著延长硅橡胶的点燃时间(TTI),降低热释放速率峰值(P-HRR),改性硅橡胶燃烧后的炭层更加致密,且OVP的效果更佳。因此,聚硅倍半氧烷在硅橡胶绝热耐烧蚀材料领域中有很大的应用价值。

    Abstract:

    Based on the thiol-ene chemical crosslinking system, silicone rubber insulation materials were prepared by room temperature light curing. The effects of new ablative fillers, octaphenyl silsesquioxane (OPS) and octavinyl silsesquioxane (OVP), on the properties of thiol-ene crosslinked silicone rubbers were studied. The silicone rubbers were systematically analyzed by TGA, mechanical test, oxyacetylene ablation, limiting oxygen index (LOI), cone calorimetry and SEM. The results show that OPS and OVP can improve the thermal stability and ablation resistance of silicone rubbers, but have some influence on the mechanical properties. The silicone rubber modified with OVP shows a better ablation resistance, and the ablation rate of the silicone rubber wire containing 15 phr OVP is 0.121 mm/s, which is 84.8% lower than that of pure silicone rubber. The addition of OPS and OVP can significantly prolong the ignition time (TTI) and reduce the peak value of heat release rate (P-HRR). The carbon layer of the modified silicone rubber is more dense after combustion, and the effect of OVP is better than OPS. Therefore, polysilicon sesquioxane has great application value in the field of silicone rubber thermal insulation and ablation resistant materials.

    参考文献
    相似文献
    引证文献
引用本文

杨鉴枭, 任芝瑞, 何吉宇, 杨荣杰.聚硅倍半氧烷改性光固化硅橡胶绝热耐烧蚀材料[J].高分子材料科学与工程,2021,37(5):30-35. Jianxiao Yang, Zhirui Ren, Jiyu He, Rongjie Yang. Polysiloxane Modified Light Cured Silicone Rubber Thermal Insulation and Ablation Resistant Materials[J]. Polymer Materials Science & Engineering,2021,37(5):30-35.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2021-08-06
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司