Abstract:In this paper, the coefficient of friction (COF), wear performance and friction vibration performance of 20% (volume fraction) carbon fiber modified polytetrafluoroethylene (CF-PTFE) under dry friction and water lubricated friction conditions are studied. Results show: (1) Under dry friction, as the sliding linear velocity increases, a large amount of heat is generated at the friction interface, adhesive wear and abrasive wear are serious, the surface becomes rougher, the COF becomes significantly larger, and the frictional vibration acceleration increases. Under water lubricated conditions, as the linear velocity increases, a water lubrication film is formed between the friction interfaces, which reduces the COF. In addition, due to the increase in speed, the flow noise increases, thereby increasing the vibration. (2) Under dry friction, as the specific pressure increases, the COF and frictional vibration change greatly. While under water lubrication conditions, the COF and frictional vibration change less as the specific pressure increases. (3) During dry friction, the wear mechanism of CF-PTFE composites under different specific pressures is mainly abrasive wear and adhesive wear; under water lubricated conditions, the main wear mechanism of CF-PTFE composites under high specific pressures is adhesive wear. Therefore, the application of carbon fiber is beneficial to improve wear resistance of PTFE under water lubricated conditions, reducing COF and frictional vibration. This research provides a certain technological method for the application of CF-PTFE in frictional moving parts.