热塑性聚氨酯发泡片材和发泡珠粒成形体的形貌与力学性能的关系
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

吉林省科技发展计划支持项目(自然科学基金)(20200201239JC);国家自然科学基金面上项目(51873226);高分子物理与化学国家重点实验室开放课题基金(2019-10)


Relationship Between Morphology and Mechanical Properties of Thermoplastic Polyurethane Foam Sheet and Bead Foam
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过不同的发泡工艺和成型工艺制备了密度相近的热塑性聚氨酯发泡片材(TPU-FS)和发泡珠粒成形体(ETPU)材料,研究了2种泡沫材料的形貌与力学性能的关系。通过扫描电镜表征了2种聚氨酯泡沫的结构;利用万能试验机研究了二者的单向压缩性能和循环压缩性能;用旋转流变仪表征了材料在不同压力下的流变性能。研究发现,相近密度下,TPU-FS和ETPU泡沫具有相近的泡孔面积占有率,但是ETPU发泡区域泡孔的平均孔径远大于TPU-FS泡沫;在循环压缩试验中,TPU-FS泡沫具有较高的损耗能和损耗百分比;流变实验中,在不同压力时,ETPU泡沫的储能模量和损耗模量均低于TPU-FS泡沫,且阻尼因子(tanδ)较小,TPU-FS泡沫的tanδ有一定的频率依赖性,而ETPU泡沫的tanδ随频率的变化不明显。同时,对密度相近的TPU-FS泡沫和ETPU泡沫的形貌与损耗百分比的关系进行了初步探讨。

    Abstract:

    Thermoplastic polyurethane foam sheet (TPU-FS) and bead foam molding material (ETPU) with similar density were prepared by different high-pressure CO2 fluid foaming and processing method, and the relationship between the morphology of the two foamed materials and their mechanical properties was explored. The structure of two kinds of polyurethane foams was characterized by SEM, the compressive property was studied by universal testing machine, and the rheological property was characterized by rheometer under different pressures. The average pore size of the bead ETPU foam is much larger than that of the TPU-FS foam while they have similar cell area occupancy; in the cyclic compression test, the TPU-FS foam has the higher hysteresis energy and hysteresis; under different pressures, the storage modulus and loss modulus of the ETPU foam are lower than those of the TPU-FS foam, as well as the damping factor tanδ. The damping property of the TPU-FS foam depends on frequency partly, while the ETPU foam does not change significantly with frequency. At the same time, the dependence of the morphology and hysteresis for TPU-FS and ETPU thermoplastic polyurethane foams with similar density was discussed.

    参考文献
    相似文献
    引证文献
引用本文

刘 芳, 杨 雪, 赵志刚, 李双双, 付志磊, 潘 鸽, 石彤非, 许东华, 翟文涛.热塑性聚氨酯发泡片材和发泡珠粒成形体的形貌与力学性能的关系[J].高分子材料科学与工程,2021,37(6):49-56. Fang Liu, Xue Yang, Zhigang Zhao, Shuangshuang Li, Zhilei Fu, Ge Pan, Tongfei Shi, Donghua Xu, Wentao Zhai. Relationship Between Morphology and Mechanical Properties of Thermoplastic Polyurethane Foam Sheet and Bead Foam[J]. Polymer Materials Science & Engineering,2021,37(6):49-56.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2021-09-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司