锌盐类成核剂对聚(1-丁烯)结晶性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

河北省自然科学基金资助项目(B2018202112)


Effect of Zinc Salt Nucleating Agent on Crystallization Properties of Poly(1-Butene)
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用偏光显微镜、差示扫描量热仪和傅里叶变换红外光谱仪等方法研究了降冰片烯二羧酸锌(NED-Zn)和ZnO成核剂对聚(1-丁烯)结晶及晶型转变的影响,并用Jeziorny法分析了聚(1-丁烯)的非等温结晶过程。结果表明,2种成核剂的加入使得聚(1-丁烯)的结晶温度升高、结晶速率加快,NED-Zn的成核效果优于ZnO。NED-Zn和ZnO成核剂的存在加快了PB的II-I晶型转变,使II-I半转变时间由39.2 h分别缩短至8.1 h和19.2 h。

    Abstract:

    The effects of NED-Zn and ZnO nucleating agents on the crystallization and crystal transformation of poly(1-butene) were studied by POM, DSC and FT-IR, and the non-isothermal crystallization process of poly(1-butene) was analyzed by Jeziorny method. The results show that the addition of the two nucleating agents increases the crystallization temperature of poly(1-butene) and accelerates the crystallization rate, Among them, the nucleation effect of NED-Zn is better than that of ZnO. The presence of NED-Zn and ZnO nucleating agents accelerates the II-I crystal transformation of PB, shortening the half transition time of II-I from 39.2 h to 8.1 h and 19.2 h, respectively.

    参考文献
    相似文献
    引证文献
引用本文

崔晓鹏, 董小芳, 李 闯, 顾高生, 公衍峰, 刘宾元.锌盐类成核剂对聚(1-丁烯)结晶性能的影响[J].高分子材料科学与工程,2021,37(6):65-70. Xiaopeng Cui, Xiaofang Dong, Chuang Li, Gaosheng Gu, Yanfeng Gong, Binyuan Liu. Effect of Zinc Salt Nucleating Agent on Crystallization Properties of Poly(1-Butene)[J]. Polymer Materials Science & Engineering,2021,37(6):65-70.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2021-09-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司