Abstract:In order to optimize water resistance properties of carex meyeriana extract/polyvinyl alcohol nanofiber membranes for medical dressings, the prepared fiber membranes were modified by gas phase cross-linking. Glutaraldehyde and concentrated hydrochloric acid were selected as crosslinking agent and catalyst to improve the water resistance and antibacterial properties of the membranes, so as to meet the performance requirements of medical dressings. The effect of crosslinking time on membrane performance was studied to determine the optimal crosslinking time. Scanning electron microscope, single fiber electronic tensile strength tester and Fourier transform infrared spectrometer were used to characterize the microscopic morphologies, mechanical properties and molecular structure of the membranes before and after modification, and the water vapor permeability, porosity, contact angle, water absorption and antibacterial property of the membranes were tested. The results show that the contact angle of the membranes is increased from 16° to 78°, and the water resistance is significantly improved. The morphology, water vapor permeability and porosity can meet the requirements of medical dressings. With the extension of crosslinking time, the properties of mechanical and water absorption of the films first increase and then weaken, reaching the maximum value of (7.34±0.80) MPa and 857% at 4 h of crosslinking time. The antibacterial property meets the optimal value at 2 h crosslinking. At this time, the antibacterial circle diameters of Escherichia coli and Staphylococcus aureus are 3.0 mm and 1.1 mm, respectively. The crosslinking 2 h and 4 h nanofiber membranes have the best comprehensive performance.