老化环境对T800碳纤维/环氧树脂基复合材料性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

辽宁省教育厅基金资助项目(L201611); 沈阳科技基金项目(18-013-0-25); 航空制造工艺数字化国防重点学科实验室基金(SHSYS201802)


Effect of Aging Environment on the Properties of T800 Carbon Fiber/Epoxy Resin Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    不同老化环境(湿热、热水、热氧)对复合材料的性能有着重要的影响。文中分析了同一温度不同老化环境下T800碳纤维/环氧树脂基复合材料的吸湿(湿热、热水)和失重(热氧)特性,并对比了老化前后的表面形貌、物理化学特性、动态力学性能及层间剪切性能。结果表明,在相同温度下,热氧环境下的失重率要大于湿热和热水环境下的吸湿率;随着老化时间延长,热氧环境下材料表面形貌变化相比湿热和热水环境变化较大;在70 ℃不同老化环境下,热氧环境下材料的玻璃化转变温度变化值要大于湿热和热水环境下的玻璃化转变温度变化值,说明热氧对T800碳纤维/环氧树脂基复合材料基体的后固化作用大于吸湿对树脂基体的塑化作用,但材料化学官能团没有明显变化。与未老化相比,试样的最大破坏载荷和剪切强度在湿热和热水环境下降低,在热氧环境下升高,但差值不大。研究对T800碳纤维/环氧树脂基复合材料结构件在更复杂环境下的使用和贮存具有重要的工程实际意义。

    Abstract:

    Different aging environments (hygrothermal, hot water, thermal-oxidative) have important effects on the properties of composite materials. The moisture absorption (hygrothermal, hot water) and mass loss (thermal oxygen) characteristics of T800 carbon fiber / epoxy resin composites under different aging environments at the same temperature were analyzed, and the surface morphologies, physicochemical characteristics, dynamic mechanical properties and interlayer shear test before and after aging were compared. The results show that at the same temperature, the mass loss rate in the thermal oxygen environment is greater than the moisture absorption rate in the hygrothermal and hot water environments; as the aging time increases, the surface morphologies of the materials in the thermal oxygen environment change more than in the hygrothermal and hot water environments; the change of the glass transition temperature of the material in a thermal oxygen environment under different aging environments at 70 ℃ is greater than the change of the glass transition temperature in a hygrothermal and hot water environment, indicating that the post-curing effect of thermal oxygen on T800 carbon fiber / epoxy resin composites of the material matrix is greater than the plasticizing effect of moisture absorption on the resin matrix, but the chemical functional groups of the materials do not changed significantly. Compared with the unaged, the maximum breaking load and shear strength of the samples are reduced in hygrothermal and hot water environment, but increased in thermal-oxidative environment, but the difference is not big. The research has important engineering significance for the use and storage of T800 carbon fiber - epoxy resin composite structural components in more complex environment.

    参考文献
    相似文献
    引证文献
引用本文

许 良, 贾耀雄, 周 松, 回 丽.老化环境对T800碳纤维/环氧树脂基复合材料性能的影响[J].高分子材料科学与工程,2021,37(6):109-115. Liang Xu, Yaoxiong Jia, Song Zhou, Li Hui. Effect of Aging Environment on the Properties of T800 Carbon Fiber/Epoxy Resin Composites[J]. Polymer Materials Science & Engineering,2021,37(6):109-115.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2021-09-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司