Abstract:In order to evaluate the effect of inorganic micron / nano particles on the mechanical properties of carbon fiber compound materials, nano-SiO2, nano-Al2O3, micron-SiO2 and micron-Al2O3 modified carbon fiber epoxy resin matrix composites (CFRP) were prepared by vacuum assisted resin transfer molding (VARTM) process at [±45/0/90]S ply angle. The transverse tensile damage impedance and damage tolerance properties were tested, the damage state of the samples was observed by acoustic SEM and C-scan, and the toughening mechanism of inorganic micron / nano particles was analyzed. The experimental results show that compared with unmodified CFRP, the initial damage threshold load of inorganic micron / nano particle modified CFRP is significantly increased, and the impact damage area is significantly reduced. The tensile fracture mode of the nano-SiO2 modified carbon fiber reinforced epoxy resin matrix composite(CF / EP / NSI)specimen is changed from single brittle fracture to ductile fracture. The maximum impact load and compressive strength after low speed impact(CAI)value are 3484 N, 62.4 MPa, 30.4% and 48.2% higher than those of unmodified CFRP, respectively . At the angle of [±45/0/90]S, the shape of impact damage is peanut, and the mode of compression failure after impact is compression failure through the middle damage zone(LDM).