接枝微晶纤维素改善聚乳酸结晶与流动特性
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金创新研究群体基金资助项目(51721091)


Grafted Microcrystalline Cellulose to Improve Crystallization and Fluidity of Poly(lactic acid)
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用氢氧化钠(NaOH)溶液和L(+)-乳酸预处理后的微晶纤维素(MCC)与左旋丙交酯(L-LA)开环聚合,接枝改性MCC改善聚乳酸(PLA)的结晶和流动特性,为后续微型注射规模化制备高性能PLA微针奠定基础。实验结果表明,一方面,通过NaOH的预处理可以有效减小MCC的颗粒尺寸,增大反应物接触面积,同时MCC的晶型在溶剂作用下由I型转变为II型,结晶度降低,增加裸露羟基的数量;另一方面,MCC-g-PLA可作为PLA的异相成核剂,提高PLA的结晶度并缩短半结晶时间(t1/2),同时还能有效降低PLA材料的黏度,改善PLA的流动充模特性。

    Abstract:

    Microcrystalline cellulose (MCC) was pretreated with sodium hydroxide (NaOH) solution and L(+)-lactic acid, and then ring-opening polymerized with L-lactide (L-LA) to prepare grafting-modified MCC, in order to improve the crystallinity and fluidity of polylactic acid (PLA), which laid a foundation for the subsequent preparation of high-performance PLA microneedles. The results show that on the one hand, the pretreatment with NaOH could effectively reduce the particle size of MCC and increase the contact area of reactants; meanwhile, under the action of NaOH, the crystal form changes from type I to type II, the crystallinity is decreased and the exposed hydroxyl groups are increased; on the other hand, MCC-g-PLA could improve the crystallinity of PLA and shorten their half crystallization time t1/2 due to heterogeneous nucleating; besides, MCC-g-PLA could effectively reduce the viscosity of PLA and improve their flow and filling properties.

    参考文献
    相似文献
    引证文献
引用本文

罗 恒, 蓝 滨, 罗勰怀, 赵中国, 胡 纵, 杨 其.接枝微晶纤维素改善聚乳酸结晶与流动特性[J].高分子材料科学与工程,2021,37(6):166-171. Heng Luo, Bin Lan, Xiehuai Luo, Zhongguo Zhao, Zong Hu, Qi Yang. Grafted Microcrystalline Cellulose to Improve Crystallization and Fluidity of Poly(lactic acid)[J]. Polymer Materials Science & Engineering,2021,37(6):166-171.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2021-09-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司