Abstract:Silanized graphene oxide (SGO) was prepared by grafting hydroxyl-terminated polydimethylsiloxane (HO-PDMS) onto the surface of graphene oxide (GO) with organotin as catalyst and isophorone diisocyanate as crosslinking agent. SGO was uniformly doped in silicone precursor, resulting in SGO/PDMS hybrid films with enhanced dielectric constant and mechanical properties. The successful grafting of HO-PDMS chains was monitored by infrared, Raman, and X-ray photoelectron spectroscopy detections. The uniform dispersion of SGO inside the PDMS elastomer was observed by scanning electron microscopy. When 10 phr SGO was added, the relative dielectric constant of the hybrid film is 3.076, increasing by 40.7% compared to the pure PDMS control. The flexible polymer electrode of PDMS/carbon black was coated on both sides of the resultant hybrid film, under the assistant of a pulse electrical signal, a dielectric elastomer actuator (DEP) based on the SGO/PDMS matrix was finally obtained. Actuated by a low voltage electric field of 4.71 V/μm (2 Hz), the DEP actuator exhibits a significant out-of-plane bending and the central deflection displacement reaches 0.654 mm, which is equivalent to 5.42% of area deformation, much better than the former reported data.