Abstract:Two new macrocyclic compounds, MCO-1 and MCO-2, were designed and synthesized under "pseudo-high dilution" conditions using 4,4'-difluoro-diphenyl sulfone, bisphenol fluorene and bisphenol A as raw material, potassium carbonate as catalyst. The structures were confirmed by matrix assisted laser desorption ionization time of flight mass spectrometry(MALDI-TOF-MS), 1HH-NMR and FT-IR. MCO-1 and MCO-2 show good solubility in a variety of organic solvents. The two macrocyclic compounds were blended with E44 epoxy resin and then cured with 4,4'-diaminodiphenyl sulfone(DDS). The heat resistance and mechanical properties of the modified epoxy resin are improved. 5% Thermal mass loss temperature of the two modified resins is 405 ℃, which is 4% higher than E44; the impact strength and flexural strength of the E44/MCO-1 are increased by 62.6% and 18.8%, while the impact strength and flexural strength of the E44/MCO-2 are increased by 22.8% and 6.7%, respectively. This paper provides ideas for toughening epoxy resins with macrocyclic compounds.