含苯并咪唑基团和吡啶基团的聚芳醚酮的制备与性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

四川省教育厅科研项目(16ZB0146);环境友好能源材料国家重点实验室开发基金(18kfhg01);国家绝缘材料工程技术研究中心开发基金(18kfjc04);西南科技大学龙山学术人才科研支持计划(18LZX552)


Preparation and Characterization of Poly(aryl ether ketone)s Containing Benzimidazolyl and Pyridyl Groups Based on 2,6-Bis(2-benzimidazolyl)pyridine
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以2,6-吡啶二羧酸和邻苯二胺为原料,经过环化反应合成了2,6-双(2-苯并咪唑基)吡啶(2,6-BBP),将其与4,4’-二羟基二苯甲酮和4,4’-二氟二苯甲酮通过C-N/C-O反应制备出含苯并咪唑基团和吡啶基团的聚芳醚酮(PAEK-BBPs)。随着苯并咪唑基团和吡啶基团含量的增加,PAEK-BBPs从半晶态向无定形态转变,同时,溶解性能、热学性能和荧光性能均得到改善。聚合物表现出高的玻璃化转变温度(Tg=157~201 ℃)和良好的热稳定性(Td5%=398~539 ℃, N2)。此外,所得聚合物表现出良好的荧光性能,荧光发射峰为425 nm。

    Abstract:

    2,6-Bis(2-benzimidazolyl)pyridine(2,6-BBP) was synthesized through cyclization reaction using 2,6-pyridinedicarboxylic acid and o-phenylenediamine as raw material. A series of poly(arylene ether ketone) containing benzimidazole and pyridine groups (PAEK-BBPs) with precise structures and high yield were prepared through C-N/C-O reaction of 2,6-BBP, 4,4'-dihydroxybenzophenone and 4,4′-difluorobenzophenone. With the increase of the content of benzimidazole and pyridine groups, the crystalline of PAEK-BBPs changes from semi-crystalline to amorphous. Meanwhile, the solubility, thermal and fluorescence properties of the as-prepared polymers are improved. All the synthesized polymers possess high glass transition temperature (Tg=157~201 ℃) and good thermal stability (Td10%=398~539 ℃, in N2). In addition, the resulted polymers exhibit excellent fluorescence properties and the fluorescence emission peak is at 425 nm.

    参考文献
    相似文献
    引证文献
引用本文

张博渊, 朱浩然, 徐业伟, 孙 毅, 常冠军.含苯并咪唑基团和吡啶基团的聚芳醚酮的制备与性能[J].高分子材料科学与工程,2021,37(7):19-26. Boyuan Zhang, Haoran Zhu, Yewei Xu, Yi Sun, Guanjun Chang. Preparation and Characterization of Poly(aryl ether ketone)s Containing Benzimidazolyl and Pyridyl Groups Based on 2,6-Bis(2-benzimidazolyl)pyridine[J]. Polymer Materials Science & Engineering,2021,37(7):19-26.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2021-09-27
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司