低收缩型混凝土用聚羧酸系减水剂的制备及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

2017年度江苏省建设系统科技计划(2017ZD247)


Preparation and Performance of Low-Shrinkage for Concrete by Polycarboxylate Superplasticizer
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用自由基共聚法,以苯乙烯磺酸钠(SS)和2-羟乙基乙烯基聚氧乙烯聚氧丙烯醚大单体(IPEG-PPG)为主要合成原料,并加入自制减缩组分(RS)共聚,制备了低收缩聚羧酸系减水剂(SRPC),通过凝胶渗透色谱、红外光谱和核磁共振测试分析了其相对分子质量及其分布以及特征官能团。测定了表面张力、对水泥颗粒吸附行为、混凝土自收缩及各项混凝土应用性能(减水率、含气量、抗压强度),并分析其吸附-降低表面张力的减缩机理。结果表明,当侧链接枝密度(EO∶PO)为3∶1,侧链长度为23且摩尔比RS∶SS∶IPEG-PPG=3∶0.6∶1时合成的聚羧酸系减水剂具有高减水性能且对混凝土具有低收缩的作用。

    Abstract:

    The low shrinkage polycarboxylate superplasticizers(SRPC) with styrene sulfonate (SS) and 2-hydroxyethyl vinyl-PEO-PPO (IPEG-PPG) as main raw material, and added shrinkage-reducing agent (RS) , were synthesized through radical copolymerization in aqueous phase. The molecular weight and its distribution of SRPC, and characteristic functional groups were analyzed by GPC, FT-IR and 1H-NMR. The surface tension, adsorption behavior, autogenous shrinkage of concrete, water-reducing rate, air content of concrete and compression strength were investigated, and the mechanism of adsorption-reduces interfacial tension was analyzed. The results show that polycarboxylate superplasticizer has a high reducing water ratio, low shrinkage for concrete, when the mole ratio of EO and PO is 3∶1, the side chain length is 23 and mole ratio of RS, SS and IPEG-PPG is 3∶0.6∶1.

    参考文献
    相似文献
    引证文献
引用本文

焦宝龙, 仇 影, 蒋青青, 董小帅, 王微涵, 裴达伟, 濮熊熊.低收缩型混凝土用聚羧酸系减水剂的制备及性能[J].高分子材料科学与工程,2021,37(7):42-49. Baolong Jiao, Yin Qiu, Qingqing Jiang, Xiaoshuai Dong, Weihan Wang, Dawei Pei, Xiongxiong Pu. Preparation and Performance of Low-Shrinkage for Concrete by Polycarboxylate Superplasticizer[J]. Polymer Materials Science & Engineering,2021,37(7):42-49.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2021-09-27
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司