Abstract:The PEEK-TiO2 membrane photocatalytic reactors were prepared by sol-gel method, blending method and chemical grafting method with titanium dioxide (TiO2) as photocatalyst and poly (ether ether ketone) (PEEK) hollow fiber membrane as matrix. The structure and properties of PEEK-TiO2 membranes were compared by SEM, EDS, XRD and TGA. Meanwhile, the photocatalytic activity of PEEK-TiO2 membrane photocatalytic reactors to remove dye was investigated based on tartrazine. The results show that the PEEK-TiO2 membranes prepared by sol-gel and chemical grafting method have complete surface and cross-section morphologies, TiO2 is mainly distributed on the surface of the membranes, and the hydrophilicity and permeability of the membranes are improved. There are defects in the PEEK-TiO2 mmbranes prepared by blending method, and TiO2 is mainly embedded in the resin matrix. The results show that the photocatalytic degradation efficiency (5 h) of tartrazine dye is 100%, 1% and 98.63% respectively by sol-gel method, blending method and chemical grafting method. The PEEK-TiO2 membrane reactor prepared by chemical grafting method has excellent reuse performance, and the degradation efficiency of tartrazine reaches 82.71% in the reuse experiment. Therefore, chemical grafting method is an effective method for PEEK hollow fiber membrane immobilized TiO2 photocatalyst.