聚三氟氯乙烯的共混增韧改性
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51873132) ;四川省应用基础研究项目(重大前沿)(2018JY0548)


Toughening Modification of Polytrifluorochloroethylene by Melt Blending
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以偏氟乙烯-三氟乙烯-三氟氯乙烯三元共聚物(Co-PVDF)作为增韧剂对聚三氟氯乙烯(PCTFE)进行了增韧改性。采用万能试验机、电子显微镜、差示扫描量热仪、高压毛细管流变仪等对PCTFE/Co-PVDF共混物的力学性能、微观结构、结晶行为以及加工性能进行了研究。结果发现,Co-PVDF可有效改善PCTFE的力学韧性,共混物表现出韧性断裂特征;当Co-PVDF质量分数为10%时,共混物的冲击强度提升了6.4倍;Co-PVDF的引入抑制了PCTFE的结晶,降低了PCTFE的结晶度;随着Co-PVDF含量的增加,PCTFE/Co-PVDF共混物的剪切黏度、平衡扭矩降低,塑化时间缩短,加工性能得到显著提高。

    Abstract:

    Vinylidene fluoride-trifluoro ethylene-chloro trifluoroethylene terpolymer (Co-PVDF) was used as toughening agent to toughen polytrifluorochloroethylene (PCTFE) by melt blending. The mechanical properties, microstructure, crystallization behavior, and processing performance of PCTFE/ Co-PVDF blends were studied through the universal testing machine, differential scanning calorimeter, electron microscope, high-pressure capillary rheometer, etc. The results show that Co-PVDF can effectively improve the mechanical toughness of PCTFE, and the blends show ductile fracture characteristics; when the mass fraction of Co-PVDF is 10%, the impact strength of the blend is increased by 6.4 times; the introduction of Co-PVDF inhibits the crystallization and reduces the crystallinity of PCTFE; as the content of Co-PVDF increases, the shear viscosity and equilibrium torque of PCTFE/Co-PVDF blends are decreased, the plasticizing time is shortened, and the processing performance is significantly improved.

    参考文献
    相似文献
    引证文献
引用本文

徐若愚, 沈佳斌, 郭少云.聚三氟氯乙烯的共混增韧改性[J].高分子材料科学与工程,2021,37(7):66-70. Ruoyu Xu, Jiabin Shen, Shaoyun Guo. Toughening Modification of Polytrifluorochloroethylene by Melt Blending[J]. Polymer Materials Science & Engineering,2021,37(7):66-70.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2021-09-27
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司