2,4,6-三溴苯胺阻燃聚甲基丙烯酰亚胺泡沫的制备及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

中央高校基本科研业务费专项资金(2572020BU05)


Properties of Flame Retardant Polymethacrylimide with 2,4,6-Tribromoaniline
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过自由基共聚合和热空气自由发泡两步法,制备阻燃聚甲基丙烯酰亚胺(PMI)泡沫,其中功能单体为甲基丙烯酸(MAA)和丙烯腈(AN)、阻燃剂为2,4,6-三溴苯胺(TBA)、引发剂为偶氮二异丁腈(AIBN)、发泡剂为甲酰胺(FA)。通过泡沫垂直燃烧和极限氧指数(LOI)研究了PMI泡沫的阻燃性能,通过锥形量热仪研究了PMI泡沫的燃烧行为,通过热重分析研究了PMI泡沫的热降解性能,通过扫描电镜对PMI泡沫的形貌进行表征,同时对阻燃PMI泡沫的拉伸、弯曲和压缩强度进行测试。结果表明,当添加8 phr TBA时,PMI50/8TBA泡沫燃烧的火焰高度明显降低,LOI高达26.3%;同时,峰值热释放速率和总热释放量相对于PMI50分别下降了25.5%,41.6%。TBA的加入,使得阻燃PMI泡沫泡孔壁变薄,从而降低了材料力学强度。

    Abstract:

    Acrylonitrile (AN) and methacrylic acid (MAA) were acted as monomer, 2,4,6-tribromoaniline (TBA) was acted as flame retardant, azobisisobutyronitrile(AIBN) and formamide (FA) were acted as initiator and foaming agent, respectively. The polymethacrylimide/TBA (PMI/TBA) foams were prepared by polymerization and free heat foaming. The flame retardant properties, combustion behavior, thermal degradation properties, morphologies and mechanical strength of the PMI50/TBA foams were investigated in details by vertical burning tests, limit oxygen index (LOI), cone calorimetry (CONE), thermogravimetric analysis (TGA), SEM and universal testing machine. With 8 phr TBA added, the flame height is decreased obviously and the value of LOI is 26.3%. Meanwhile, comparing with PMI50, the PHRR and THR of PMI50/8TBA are decreased by 25.5% and 41.6%, respectively. The results of TGA demonstrate that the prepared PMI50/8TBA foams possess the high char residue at 800 ℃. However, the cell wall of PMI50/8TBA is thin, and the thermal properties and mechanical properties are decreased.

    参考文献
    相似文献
    引证文献
引用本文

李东升, 许苗军, 张志永, 李 斌.2,4,6-三溴苯胺阻燃聚甲基丙烯酰亚胺泡沫的制备及性能[J].高分子材料科学与工程,2021,37(7):81-86. Dongsheng Li, Miaojun Xu, Zhiyong Zhang, Bin Li. Properties of Flame Retardant Polymethacrylimide with 2,4,6-Tribromoaniline[J]. Polymer Materials Science & Engineering,2021,37(7):81-86.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2021-09-27
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司