预拉伸对聚丁二酸丁二醇酯/碳纳米管复合材料结晶行为及力学性能影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Effect of Pre-Stretching on the Crystallization Behavior and Mechanical Properties of Polybutylene Succinate/Carbon Nanotube Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以熔融共混法制备了碳纳米管(CNTs)增强的聚丁二酸丁二醇酯(PBS)复合材料,研究了预拉伸对PBS/CNTs复合材料结晶行为及力学性能的影响。CNTs的加入在复合材料中起到了异相成核作用,促进了PBS的结晶,提高了复合材料的力学性能。单轴预拉伸使CNTs与PBS分子链的有序程度同时增加,有序排列的CNTs进一步增加了PBS晶体的取向度,预拉伸与CNTs对复合材料的增强实现了协同作用。然而,加入CNTs以及在不同温度、不同拉伸应变下的预拉伸均未导致PBS晶体结构发生转变。经在60 ℃预拉伸500%的PBS/CNTs (质量分数5%)复合材料,其拉伸强度达到286.1 MPa、弹性模量达2.9 GPa,实现了对PBS的增强。

    Abstract:

    Carbon nanotubes (CNTs) reinforced polybutylene succinate (PBS) composites were prepared by melt blending. The effect of pre-stretching on the crystallization behavior and mechanical properties of PBS/CNTs composites was studied. The addition of CNTs plays a role in the heterogeneous nucleation of the composites, which promotes the crystallization of PBS and improves the mechanical properties of the composites. Uniaxial pre-stretching increases the order of CNTs and PBS molecular chains at the same time. Orderly arranged CNTs further increase the orientation of PBS crystals. Pre-stretching and the addition of CNTs enhance the composites to achieve a synergistic effect. However, the addition of CNTs and the pre-stretching at different temperatures and different tensile strains do not cause the PBS crystal structure to change. The PBS/CNTs (5%) composite material pre-stretched at 60 ℃ by 500% has a tensile strength of 286.1 MPa and an elastic modulus of 2.9 GPa, realizing the enhancement of PBS.

    参考文献
    相似文献
    引证文献
引用本文

刘 旭, 徐可可, 徐立新, 张 宏, 周 琼, 孟晓宇.预拉伸对聚丁二酸丁二醇酯/碳纳米管复合材料结晶行为及力学性能影响[J].高分子材料科学与工程,2021,37(7):109-115. Xu Liu, Keke Xu, Lixin Xu, Hong Zhang, Qiong Zhou, Xiaoyu Meng. Effect of Pre-Stretching on the Crystallization Behavior and Mechanical Properties of Polybutylene Succinate/Carbon Nanotube Composites[J]. Polymer Materials Science & Engineering,2021,37(7):109-115.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2021-09-27
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司