含立构复合晶体的聚己内酯形状记忆弹性体的制备及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金青年基金资助项目(51903021)


Preparation and Properties of Shape Memory Polycaprolactone Elastomer Containing Stereocomplex Crystals
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以聚己内酯(PCL)、左旋丙交酯(LLA)、右旋丙交酯(DLA)为原料,以辛酸亚锡(Sn(Oct)2)为催化剂,合成了不同LA含量的P(LLA-b-CL)和P(DLA-b-CL)嵌段共聚物。用凝胶渗透色谱、核磁共振等研究了嵌段共聚物的组成与结构。将2种嵌段共聚物按一定比例溶液共混,并通过流延法得到PCL基形状记忆弹性体薄膜,研究了其结晶性能、晶体形态、力学性能及形状记忆性能。结果表明,随LA添加量增大,弹性体薄膜中的PLLA与PDLA形成的立构复合(SC)晶体结晶度增大;同时,PLA非晶区含量提高,70 ℃拉伸时PLA链段产生滑移,形状回复率降低。因此,弹性体中SC晶体的结晶度越高,形状回复率越高,形状回复率最佳可达93.54%。

    Abstract:

    P(LLA-b-CL) and P(DLA-b-CL) block copolymers with different polylactic acid (PLA) molecular chain lengths were prepared by the two steps polymerization which consists of polycaprolactone (PCL) and LLA/DLA, using Sn(Oct)2 as catalyst. The structure and molecular chain length of block copolymers were analyzed by GPC and NMR. PCL-based films with stereocomplex(SC) crystals were prepared by mixing P(LLA-b-CL) and P(DLA-b-CL) at a certain ratio, and the shape memory performance, crystallization behavior, crystal morphology and mechanical properties of the films were studied by rotational rheometer, DSC, XRD, universal testing machine. The results show that the enantiomeric blends of P(LLA-b-CL) and P(DLA-b-CL) show a relatively fast crystallization rate as a result of the stereocomplexation of PCL and PLA blocks. SC rather than homocrystallites(HC), are exclusively formed in the films with various PLLA/PDLA mixing ratios. The PLA molecular chain length and SC crystallization are increased with the increase of LA content. The shape recovery rate(Rr) of films is decreased due to the relative slippage of PLA segments in amorphous regions while the film is stretched at 70 ℃. Therefore, the higher the absolute crystallinity of SC crystals in the films is, the higher the shape recovery rate(Rr) is, reaching the highest valve of 93.54%.

    参考文献
    相似文献
    引证文献
引用本文

袁 洁, 余苗苗, 赵彩霞, 邹国享, 杨 荣, 李锦春.含立构复合晶体的聚己内酯形状记忆弹性体的制备及性能[J].高分子材料科学与工程,2021,37(8):10-18. Jie Yuan, Miaomiao Yu, Caixia Zhao, Guoxiang Zou, Rong Yang, Jinchun Li. Preparation and Properties of Shape Memory Polycaprolactone Elastomer Containing Stereocomplex Crystals[J]. Polymer Materials Science & Engineering,2021,37(8):10-18.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2021-11-12
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司