Abstract:The self-made water-soluble polyester(WPET) was grafted and modified with γ-glycidoxypropyltrimethoxysilane (KH560) to obtain cross-linked water-soluble polyester(CWPET). The structure and performance of cross-linked water-soluble polyester were analyzed through FT-IR, relative molecular mass, viscosity, particle size, turbiscan stability index (TSI) and TGA. The results show that the particle size of the modified product emulsion decreases, the dispersion stability increases, the viscosity increases, and the thermal stability of the polymer increases. When the mass fraction of KH560 and WPET is 8%, 10% respectively, the weight average molecular weight of the polymer is 1.5×4, the polydispersity is 1.4, the particle size of the water-soluble polyester microemulsion is 80.2 nm, and the thermal decomposition temperature is 415 ℃. The TSI index is the lowest and smooth. Meanwhile, it is a typical pseudoplastic fluid. For the first time, the prepared CWPET was applied to the surface sizing of special paper. When the mass fraction CWPET is 4%, the mass fraction of polyvinyl alcohol(PVA) is 1% (relative to absolute dry pulp), the paper has a folding endurance of 145 times, a stiffness of 101.9 mN, a tear index of 13.77 mN·m2/g, a tensile index of 70.08 N·m/g, and a contact angle of 96°. After WPET sizing under the same condition, the paper has a folding endurance of 115 times, a stiffness of 82.6 mN, a tear index of 11.02 mN·m2/g, a tensile index of 58.25 N·m/g, and a contact angle of 85.95°, which significantly improves the strength and water resistance of paper.