高氯酸锂增容聚乳酸/聚碳酸亚丙基酯共混体系
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金面上项目(51033003);国家自然科学基金创新研究群体项目(51721091)


Polylactic Acid/Polycarbonate Blending System with Lithium Perchloride
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用高氯酸锂为聚乳酸(PLA)/聚碳酸亚丙基酯(PPC)共混材料的增容剂,通过研究高氯酸锂对PLA/PPC共混体系相容性、热性能及力学性能的影响发现,高氯酸锂的加入能有效改善PLA与PPC之间的相界面,显著缩短体系的半结晶时间(最高达538.7%),使材料的断裂伸长率提高了235%。同时,通过调节高氯酸锂与PPC的共混顺序,并结合傅里叶红外光谱探究分析了高氯酸锂对PLA/PPC共混体系的增容机理,发现高氯酸锂通过对PPC的络合作用及PLA的电荷作用增强PLA与PPC之间作用力。

    Abstract:

    Lithium perchlorate was used as compatibilizer for polylactic acid (PLA)/polycarbonate (PPC) blends. By studying the effects of lithium perchlorate on the compatibility, thermal and mechanical properties of PLA/PPC blends, it is found that the addition of lithium perchlorate can effectively improve the phase interface between PLA and PPC, significantly reduce the semi-crystallization time of the system (up to 538.7%), and increase the elongation at break of the material by 235%. Meanwhile, by adjusting the blending sequence of lithium perchlorate and PPC, and combining with Fourier infrared spectroscopy (FT-IR), the compatibilization mechanism of lithium perchlorate on PLA/PPC blending system was analyzed. It is found that lithium perchlorate could enhance the PLA and PPC forces by complexing PPC and charge action with PLA.

    参考文献
    相似文献
    引证文献
引用本文

王 凯, 张 凯, 侯德发, 刘 磊, 杨鸣波.高氯酸锂增容聚乳酸/聚碳酸亚丙基酯共混体系[J].高分子材料科学与工程,2021,37(8):76-82. Kai Wang, Kai Zhang, Defa Hou, Lei Liu, Mingbo Yang. Polylactic Acid/Polycarbonate Blending System with Lithium Perchloride[J]. Polymer Materials Science & Engineering,2021,37(8):76-82.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2021-11-12
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司