一种碳纤维增强双元基体复合材料的高温性能和摩擦学性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

National Key Research and Development Program of China (Grant No. 2017YFB110340000); 上海市优秀学术/技术带头人计划(20XD1434300); Sponsored by Program of Shanghai Academic/Technology Research Leader(No.20XD1434300);广东省重点研发计划(2019B010929001);The Key R&D Program of Guangdong Province (Grant No.2019B010929001)


High Temperature Property and Tribological Property of a Carbon Fiber Reinforced Two-Element Matrix Composite
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    高性能自润滑复合材料有助于提高零件的使用寿命,减少维护次数,对先进制造业至关重要。为了开发新型复合材料,文中采用化学气相渗透法(CVI)和真空浸渍固化工艺制备了热解碳改性碳纤维立体织物增强聚酰亚胺复合材料(PI-C/CF)。该复合材料具有良好的热力学性能,其初始分解温度为400 ℃以上,形变温度在380 ℃以上,并且在380 ℃的强度保持率在68%以上。此外,PI-C/CF还具有优异的自润滑性能和出色的抗磨损性能,在室温(RT)其平均摩擦系数为0.051,体积磨损率为6.125×10-14 m3/(N·m);在RT~380 ℃范围内,复合材料的体积磨损率为7.24×10-14m3/(N·m)。最后,通过研究PI-C/CF材料的抗氧老化性能和减磨耐磨机理,发现热解碳对碳毡的改性以及热解碳与聚酰亚胺的协同作用是其具有耐高温和自润滑性能的关键。

    Abstract:

    High-performance self-lubricating composites are crucial to the advanced manufacturing industry, because they can help the drive parts increase service life and decrease the number of maintenances. In this paper, in order to develop a novel self-lubricating composite with outstanding high temperature performance, the pyrolytic carbon modified carbon fiber felt reinforced polyimide composites (PI-C/CF) were prepared by chemical vapor infiltration (CVI) and vacuum impregnation-curing process. The PI-C/CF exhibits good high temperature performance, because the initial decomposition temperature of this composite is 400 ℃, the deformation temperature is over 380 ℃, and it could keep 68% strength when it is served at 380 ℃. In addition, PI-C/CF has excellent self-lubricating performance and outstanding anti-wear performance, it presents a average friction coefficient of 0.051 and volume wear rate of 6.125×10-14 m3/(N·m) at room temperature (RT). Moreover, the composite exhibits a low volume wear rate of 7.24×10-14 m3/(N·m) when it works at the range of RT to 380 ℃. All above, PI-C/CF was verified as self-lubricating composite with the excellent heat resistance, and all the properties could be attributed to the modification of carbon felt by pyrolytic carbon and the synergistic effect from pyrolytic carbon and polyimide.

    参考文献
    相似文献
    引证文献
引用本文

俞鸣明, 薛 鹍, 方 琳, 张传媛, 梁 磊, 徐 菁, 任慕苏, 孙晋良.一种碳纤维增强双元基体复合材料的高温性能和摩擦学性能[J].高分子材料科学与工程,2021,37(8):93-101. Mingming Yu, Kun Xue, Xueqiang Liu, Lin Fang, Chuanyuan Zhang, Lei Liang>, Jing Xu, Musu Ren, Jinliang Sun. High Temperature Property and Tribological Property of a Carbon Fiber Reinforced Two-Element Matrix Composite[J]. Polymer Materials Science & Engineering,2021,37(8):93-101.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2021-11-12
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司