单宁酸仿生修饰及多元胺可控接枝表面改性超高分子量聚乙烯纤维
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

天津市自然科学基金资助项目(18JCYBJC18100);天津工业大学纤维培育基金资助项目(TGF-21-A8)


Tannic Acid Bionic Modification and Polyamine Controllable Grafting Surface Modification of Ultra-High Molecular Weight Polyethylene Fiber
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    首先利用单宁酸-金属离子络合物对超高分子量聚乙烯(UHMWPE)纤维进行表面涂覆改性,在纤维表面引入单宁酸,进而以单宁酸为过渡层,利用氰尿酰氯和间苯二胺进行可控接枝,从而引入氨基基团,以提高纤维与树脂间的结合力。结果表明,UHMWPE纤维表面可控接枝大量氨基官能团,纤维表面粗糙度明显增加,纤维与树脂之间的界面剪切强度增强,其中接枝次数为3次后的UHMWPE纤维与环氧树脂界面剪切强度达到1.40 MPa,与原始纤维相比较提高了89.98%。

    Abstract:

    The surface modification of ultrahigh molecular weight polyethylene(UHMWPE) fiber was applied by means of tannic acid-metal ion complex surface coating, introducing tannic acid on the UHMWPE fiber surface. Then the tannic acid deposited on the fiber surface was used as transition layer to form dendritic macromolecular amine groups on the fiber surface by using cyanoyl chloride and p-phenylenediamine, achieving the purpose of improving the bonding force between fiber and resin. The results show that the surface of UHMWPE fibers is successfully grafted with dendrimers containing a large number of amine functional groups, and the surface roughness of the fibers after grafting is significantly increased. The results of interface shear strength test show that the interfacial shear strength between the fibers and the resin is enhanced greatly, reaching 1.40 MPa. Compared with that of the original fiber, the bonding ability between the modified UHMWPE fiber and the epoxy resin matrix is effectively increased by 89.98%.

    参考文献
    相似文献
    引证文献
引用本文

高佳鑫, 马金阳, 王世成, 冯 霞, 赵义平, 陈 莉.单宁酸仿生修饰及多元胺可控接枝表面改性超高分子量聚乙烯纤维[J].高分子材料科学与工程,2021,37(8):131-137. Jiaxin Gao, Jinyang Ma, Shicheng Wang, Xia Feng, Yiping Zhao, Li Chen. Tannic Acid Bionic Modification and Polyamine Controllable Grafting Surface Modification of Ultra-High Molecular Weight Polyethylene Fiber[J]. Polymer Materials Science & Engineering,2021,37(8):131-137.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2021-11-12
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司