Abstract:Fluorescent silicone oils (AH1, AH2 and AH3) were synthesized using hydrosilylation with 9-vinyl anthracene and methyl-terminated silicone oil as raw material, and platinum as Karstedt catalyst. The chemical structure of the fluorescent silicone oils was characterized by NMR and FT-IR, and its optical properties were characterized by fluorescence spectrophotometer and ultraviolet visible absorption spectrophotometer. The additional fluorescent silicon elastomers (FPDMS) were prepared using fluorescent silicon oil as cross-linker, and vinyl-terminated silicone oil as base polymer through crosslinking curing reaction at high temperature. The effects of fluorescent silicon groups on the silicon elastomer, including its hardness, cross-linking network, mechanical properties, and thermal stability, were analyzed. Results show that the fluorescent elastomers have the lower hardness (13.9~33.4 H00), lower crosslinking density, better thermal stability and better mechanical properties. Compared with the raw material elastomer, the tensile strength of the fluorescent silicone elastomer is increased by 0.59~2.27 times. In the oil bleeding test of elastomers, fluorescent silicon elastomers can fluorescently trace the exudation of substances and monitor its exudation in real time. Meanwhile, the diffusion range-time curve of the exudate was fitted to quantitatively evaluate the oil permeation rate in order to protect the normal use of electronic devices.