聚芳硫醚砜/酮共聚物与钛合金的粘接性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51573103)


Bonding Strength of Carbonyl Modified Polyarylene Sulfide Sulfone and Titanium Alloys
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用4,4’-二氯苯砜、4,4’-二氟二苯甲酮等为原料,通过两步法制备得到不同酮基含量的聚芳硫醚砜/酮聚合物(K-PASS)。采用红外光谱、X射线光电子能谱、搭接剪切性能等测试对聚合物的制备以及聚合物与钛合金的搭接剪切强度进行了研究。结果表明,通过常压法成功制备了不同酮基含量的K-PASS,K-PASS与钛合金的搭接剪切强度随着酮基含量的增加呈现先增大后减小的趋势,当酮基含量为50%时,搭接剪切强度达到最大值,为12.6 MPa,相较于PASS纯树脂与钛合金的剪切强度提高了34.5%。

    Abstract:

    Using 4,4′-dichlorophenyl sulfone (DCDPS), 4,4′-difluorobenzophenone (DFBP), etc. as raw material, polyarylene sulfide sulfone/ketone copolymers (K-PASS) with different copolymerization ratios were synthesized through a two-step method. The performance of the polymers and the lap shear strength of the polymers with the titanium alloy were studied through infrared spectroscopy, X-ray photoelectron energy spectrum, lap shear performance, etc. The results show that K-PASS with different ketone carbonyl contents was successfully synthesized by atmospheric pressure reaction. The lap shear strength of K-PASS and titanium alloy is increased first and then decreased with the increase of carbonyl group content. When the ketone carbonyl ratio reaches 50%, the lap shear strength achieves the maximum value of 12.6 MPa, which is 34.5% higher than that of pure PASS with titanium alloy.

    参考文献
    相似文献
    引证文献
引用本文

崔齐齐, 吴喆夫, 杨家操, 王孝军, 杨 杰, 张 刚.聚芳硫醚砜/酮共聚物与钛合金的粘接性能[J].高分子材料科学与工程,2021,37(9):45-52. Qiqi Cui, Zhefu Wu, Jiacao Yang, Xiaojun Wang, Jie Yang, Gang Zhang. Bonding Strength of Carbonyl Modified Polyarylene Sulfide Sulfone and Titanium Alloys[J]. Polymer Materials Science & Engineering,2021,37(9):45-52.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2021-12-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司