Abstract:In order to study the influence of different aging time and temperature on the mechanical properties of rubber surface, the elastic modulus, hardness, storage modulus, loss modulus and loss factor of rubber at different aging time and temperature were measured by nano-indenter. Results show that the aging time and temperature are two key factors that affect the nanomechanical properties of rubber surface. Compared with the aging time, the aging temperature has a more significant impact on the mechanical properties of rubber. The elastic modulus, hardness, loss factor and other mechanical properties of rubber are less affected by aging time at 90 ℃ and 105 ℃ of aging temperature. Above 120 ℃, the hardness and elastic modulus of rubber gradually increase and the creep performance and viscosity gradually decrease as the aging time increases. The growth rate of the mechanical properties of rubber changes from low to first fast and then slows at 135 ℃. After 3 d of aging, the hardness and elastic modulus of rubber begin to increase rapidly and then the rate of change gradually decreases. For the seals used for a long time at higher temperature in engineering, the service temperature must be strictly controlled to prevent them from aging and improve their seal life.