针尖载药可溶性聚合物微针的制备及释药性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(22078202,21991101)


Fabrication and Drug Release Properties of Soluble Polymer Microneedles with Drug-Loaded Tips
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    可溶性聚合物微针是一种新型经皮给药系统,受到医药领域的广泛关注。皮肤弹性会导致微针刺入不完全造成药物浪费。为了解决这一问题,文中通过优化微针溶液配方和制备工艺,采用分步浇注法制备了针尖载药可溶性聚合物微针,提高了给药效率,并通过构建不同组成结构的聚合物微针实现了释药性能的调控。研究中选择具有生物相容性的聚合物材料,以磺酰罗丹明B为模型药物。结果表明,药物主要集中在微针针尖,占针体高度60%左右。所制备的针尖载药可溶性聚合物微针具有高力学强度和刺入皮肤能力,载药量稳定。体外释药结果表明,通过选择不同的聚合物材料,载药针尖可以实现快速溶解或缓慢溶胀,从而实现药物的快速释放或缓慢释放。文中提出的可溶性聚合物微针实现了针尖载药和释药性能调控,在经皮给药方面具有潜在的应用前景。

    Abstract:

    Soluble polymer microneedles (MNs) as novel transdermal drug delivery system have aroused considerable attention in the pharmaceutical field. Skin elasticity may cause incomplete penetration of MNs, resulting in drug waste. In this work, through the optimization of the solution formulation and preparation process, two kinds of soluble polymer MNs with drug-loaded tips were fabricated via a step-by-step casting method to achieve efficient drug administration and regulation of drug release. Biocompatible polymer materials were chosen for MNs preparation, and sulforhodamine B was selected as model drug. The results show that the drug is mainly concentrated in needle tips (about 60% of the needle height). The proposed soluble polymer MNs have high mechanical strength to puncture the skin, and the drug loading is stable. The in vitro drug release results show that by selecting different polymer materials, the drug-loaded needle tips could be dissolved rapidly or slowly, so as to achieve rapid drug release or sustained drug release. The proposed soluble polymer MNs achieve tip-loading drug and regulation of drug release, which has potential applications in transdermal drug delivery.

    参考文献
    相似文献
    引证文献
引用本文

李新娇, 巨晓洁, 谢 锐, 汪 伟, 刘 壮, 褚良银.针尖载药可溶性聚合物微针的制备及释药性能[J].高分子材料科学与工程,2021,37(9):124-132. Xinjiao Li, Xiaojie Ju, Rui Xie, Wei Wang, Zhuang Liu, Liangyin Chu. Fabrication and Drug Release Properties of Soluble Polymer Microneedles with Drug-Loaded Tips[J]. Polymer Materials Science & Engineering,2021,37(9):124-132.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2021-12-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司