聚乳酸/柠檬酸三丁酯改性微晶纤维素的制备与性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51721091,21674069,21174092);东华理工大学博士科研启动基金(DHBK2019124);江西省聚合物微纳制造与器件重点实验室开放基金(PMND202009)


Preparation and Properties of Polylactic Acid/Tributyl Citrate Modified Microcrystalline Cellulose
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    选用微晶纤维素(MCC)和短链的柠檬酸三丁酯(TC)在溶液体系中通过酯交换反应制备表面改性纤维素(TM)。扫描电镜研究发现,酯交换的改性过程完全破坏了纤维素的晶体结构,减小了纤维素的分散尺寸,由50 μm减小为200~300 nm;动态力学热分析和流变性能分析表明,纤维素的表面改性改善了其在聚乳酸中的分散效果,提升了与聚乳酸基体的界面相容性;差示扫描量热分析表明,添加3%的TM,聚乳酸的结晶度提升10倍以上。

    Abstract:

    Microcrystalline cellulose (MCC) and short chain tributyl citrate (TC) were used to prepare surface modified cellulose (TM) in solution system by transesterification reaction. It is found that the modification process of transesterification completely destroyed the crystal structure of cellulose and reduces the dispersion size of cellulose from 50 μm to 200~300 nm by SEM;the dispersion of cellulose in polylactic acid and the interface compatibility with polylactic acid matrix are improved. The results of thermodynamics and rheology show that the modified cellulose has a better dispersion and could effectively improve the crystallization ability of PLA. The addition of 3% TM increases the crystallinity of PLA by more than 10 times measured by DSC.

    参考文献
    相似文献
    引证文献
引用本文

江元平, 张云秀, 李嘉莉, 黄苏萍, 严 悰, 杨鸣波, 郑少笛, 柳和生.聚乳酸/柠檬酸三丁酯改性微晶纤维素的制备与性能[J].高分子材料科学与工程,2021,37(9):133-140. Yuanping Jiang, Yunxiu Zhang, Jiali Li, Suping Huang, Cong Yan, Mingbo Yang, Shaodi Zheng, Hesheng Liu. Preparation and Properties of Polylactic Acid/Tributyl Citrate Modified Microcrystalline Cellulose[J]. Polymer Materials Science & Engineering,2021,37(9):133-140.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2021-12-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司