Abstract:Focused on hexafluoropropylene which was used as reaction gas to fluorinate the surface of PP powders through plasma excitation, and the fluorinated modified PP electret was prepared by thermally polarized electret. FT-IR, EDS, SEM, DSC, XRD, contact angle tester and vibrating capacitance electrometer were used to characterize the electret of the fluorinated modified PP, and the influence of fluorinated modification on its electret performance was studied. The results show that the low-temperature hexafluoropropylene plasma treatment of PP micropowder is grafted with hexafluoropropylene; the hydrophobicity after plasma treatment is improved, and the maximum water contact angle is 126°; under the condition of 400 W, with the increase of plasma treatment time, the surface fluorine content first increases and then decreases. When treated for 15 min, the surface fluorine content reaches the maximum value of 0.88%; when the electret voltage is constant, the higher the surface fluorine content, the greater the initial surface potential of the electret and the higher the charge storage capacity. Plasma fluorination has no significant effect on the crystallization behavior; the melting peak of the electret is increased by about 8 ℃ due to the external electric field force. Fluorinated PP electrets show a good antibacterial activity against Escherichia coli.