改性三叶形聚乙烯醇纤维/环氧树脂复合材料的结构与性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家重点研发计划(2017YFB0309001);高分子材料工程 国家重点实验室自主课题(sklpme2018-3-01)


Structure and Properties of Modified Trilobal Poly (vinyl alcohol) Fiber/Epoxy Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    异形截面纤维大的比表面积有利于提高纤维与基体树脂间的界面结合,改善复合材料的强度和韧性。文中采用环氧氯丙烷对熔纺三叶形聚乙烯醇(PVA)纤维进行表面改性,通过模压成型首次制备了改性三叶形PVA纤维/环氧树脂复合材料。对比研究了改性前后三叶形PVA纤维表面结构和性能及对复合材料力学性能的影响。结果表明,改性后三叶形PVA纤维表面出现鳞状沟槽,粗糙度增加;纤维表面接枝了环氧官能团,与环氧预浸料的接触角减小,浸润性增加;表面接枝的环氧官能团参与了基体树脂的固化反应,单纤拔出力提高至3.61 N;改性三叶形PVA纤维/环氧复合材料的拉伸强度、弯曲强度和冲击强度分别为62.3 MPa,53.8 MPa和79.0 kJ/m2,比未改性三叶形PVA纤维/环氧复合材料分别提高了22.9%,134.9%和43.1%。

    Abstract:

    The larger specific surface area of profiled fibers is beneficial to improve the interfacial bonding between fibers and resins, resulting in enhancing the strength and toughness of composites. In this paper, the surface modification of melt-spinning trilobal poly (vinyl alcohol) (PVA) fibers was carried out with epoxy chloropropane, and the modified trilobal PVA fiber/epoxy resin composites were prepared by hot molding for the first time. The surface structure and properties of the trilobal PVA fibers before and after modification and their effects on the mechanical properties of the composites were investigated. The results show that the surface of the modified trilobal PVA fibers has scaly grooves and the roughness is increased. The epoxy functional groups were grafted onto the surface of trilobal PVA fibers, the contact angle with the epoxy prepreg decreases and the wettability is increased. The epoxy functional groups grafted on the surface of PVA fibers participated in the curing reaction of epoxy resin, and the single fiber pull-out force is increased to 3.61 N. The tensile strength, flexural strength and impact strength of the modified trilobal PVA fiber/epoxy composite are 62.3 MPa, 53.8 MPa and 79.0 kJ/m2, respectively, which are 22.9%, 134.9% and 43.1% higher than those of the unmodified trilobal PVA fiber/epoxy composite.

    参考文献
    相似文献
    引证文献
引用本文

周 婷, 陈 宁.改性三叶形聚乙烯醇纤维/环氧树脂复合材料的结构与性能[J].高分子材料科学与工程,2021,37(10):45-52. Ting Zhou, Ning Chen. Structure and Properties of Modified Trilobal Poly (vinyl alcohol) Fiber/Epoxy Composites[J]. Polymer Materials Science & Engineering,2021,37(10):45-52.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2022-01-09
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司