3D石墨烯海绵对聚酰亚胺泡沫使用安全性的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

黑龙江省自然科学基金资助项目(LH2019E038)


Effect of 3D Graphene Sponge on the Safety of Polyimide Foam
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    根据石墨烯及海绵结构的特性,以一步法聚酰亚胺泡沫(PIF)为基体,通过在一步法PIF孔结构中构筑还原氧化石墨烯海绵(rGOs),从而对一步法PIF材料进行阻燃改性,研究rGOs在不同水热还原温度下对rGOs-PIF材料阻燃性能、微观泡孔结构的影响、烟密度的影响。结果表明,rGOs-PIF材料阻燃性能得到明显提升,使用安全性提高。当水热烟密度等方面的影响反应温度为180 ℃时,rGOs-PIF样品的极限氧指数(LOI)最高达到28.3%,相较于一步法PIF提高了34.38%;当水热反应温度为160 ℃时,rGOs-PIF样品烟密度等级(SDR)降低了77.98%,最大烟密度(MSD)降低了77.83%。

    Abstract:

    According to the characteristics of graphene and sponge structure, using one-step polyimide foams (PIF) as matrix, reduced graphene oxide sponge (rGOs) was built in the one-step PIF pore structure. Therefore, the flame retardant modification of the one-step PIF materials was carried out, and the effects of rGOs on the flame retardant properties, micro cell structure, smoke density and other aspects of rGOs-PIF materials at different hydrothermal reduction temperatures were studied. The results show that the flame retardant properties of rGOs-PIF materials are significantly improved, and the safety of use is improved. When the hydrothermal reaction temperature is 180 ℃, the limiting oxygen index (LOI) of the rGOs-PIF sample is the highest, reaching 28.3%, which is 34.38% higher than that of the one-step PIF; when the hydrothermal reaction temperature is 160 ℃, the smoke density grade (SDR) of rGOs-PIF samples is reduced by 77.98%, and the maximum smoke density (MSD) is reduced by 77.83%.

    参考文献
    相似文献
    引证文献
引用本文

刘 俊, 张 浩, 王 丹, 任晓荷, 韩世辉, 孙高辉.3D石墨烯海绵对聚酰亚胺泡沫使用安全性的影响[J].高分子材料科学与工程,2021,37(10):78-85. Jun Liu, Hao Zhang, Dan Wang, Xiaohe Ren, Shihui Han, Gaohui Sun. Effect of 3D Graphene Sponge on the Safety of Polyimide Foam[J]. Polymer Materials Science & Engineering,2021,37(10):78-85.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2022-01-09
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司