防穴蚀微胶囊/环氧树脂涂料的制备及涂层结构
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国防预研项目(42142123620)


Preparation and Coating Structure of Anti Pitting Microcapsule/Epoxy Resin Coating
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以甲基丙烯酸甲酯(BMA)、甲基丙烯酸丁酯(MMA)的共聚物为壁材、聚丙烯酰胺(PAM)水溶液为芯材,采用原位聚合法合成防穴蚀微胶囊,并将其加入环氧树脂中制成防穴蚀涂料。探究了硬度、附着力、抗冲击性、拉伸强度、最大吸水率等涂层力学性能的影响因素;采用磁致伸缩振动实验研究了涂料防穴蚀性能。结果表明,随着微胶囊用量及涂层厚度的增加,涂层防穴蚀性能提升但力学性能呈下降趋势。在此基础上,设计了一种新型结构涂层,即从涂层内部到表面,微胶囊含量由0%递增至5%,对比微胶囊均匀分布的涂层结构,新型涂层结构在力学性能和防穴蚀效果上均有显著提升。

    Abstract:

    Using the copolymer of methyl methacrylate (BMA) and butyl methacrylate (MMA) as wall material and polyacrylamide (PAM) aqueous solution as core material, the anti cavitation microcapsules were synthesized by in-situ polymerization, and added into epoxy resin to make the anti cavitation coatings. The influencing factors of coating mechanical properties such as hardness, adhesion, impact resistance, tensile strength and maximum water absorption were explored; the anti cavitation performance of the coating was studied by magnetostrictive vibration experiment. The results show that the anti cavitation performance of the coatings is increased with the increase of microcapsule dosage and coating thickness, but the mechanical properties are decreased. On this basis, a new structural coating was designed. The microcapsule contents increases from 0% to 5% from the inside to the surface of the coatings. Compared with the coating structure with uniform microcapsule distribution, the new structural coatings have the significantly improved mechanical properties and anti cavitation effect.

    参考文献
    相似文献
    引证文献
引用本文

徐朝阳, 余红伟, 王源升, 王 轩.防穴蚀微胶囊/环氧树脂涂料的制备及涂层结构[J].高分子材料科学与工程,2021,37(10):94-104. Chaoyang Xu, Hongwei Yu, Yuansheng Wang, Xuan Wang. Preparation and Coating Structure of Anti Pitting Microcapsule/Epoxy Resin Coating[J]. Polymer Materials Science & Engineering,2021,37(10):94-104.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2022-01-09
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司