以氧化诱导期为性能变化指标推算三元乙丙橡胶O型密封圈的贮存寿命
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51790501)


Lifetime Estimation of EPDM O-Rings by Using Oxidation Induction Time as Performance Indicator
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    商品化的橡胶制品常常由于尺寸小、异形等原因难以使用传统的力学性能作为寿命推算的性能指标,为了解决这一问题,文中首次提出将氧化诱导期(OIT)作为性能变化指标来推算三元乙丙橡胶O型密封圈的贮存寿命。分别在80 ℃,100 ℃,120 ℃,140 ℃和160 ℃对EPDM O型圈进行数小时至2年的热空气加速老化,测试老化前后样品的拉伸强度、断裂伸长率及氧化诱导时间。研究结果表明,随着老化时间的延长和老化温度的升高,OIT的变化趋势与拉伸强度和断裂伸长率一致;使用OIT作为性能变化指标计算出的EPDM O型圈的贮存寿命为28.6年,与以拉伸强度为性能变化指标时基本一致,充分证明了以OIT作为寿命推算指标的可行性,解决了微小或异形制品的寿命估算难的问题。

    Abstract:

    It is difficult to estimate the lifetime of commercial rubber products through traditional mechanical properties due to small size and abnormal shape. To solve this problem, the oxidation induction time (OIT) was used as performance change index to predict the life of EPDM O-rings for the first time. The EPDM O-rings were subjected to accelerated thermal aging at 80 ℃, 100 ℃, 120 ℃, 140 ℃ and 160 ℃ for several hours to two years, and the samples before and after aging were tested for tensile strength, elongation at break and oxidation induction time. The research results show that, with the extension of aging time and increase of aging temperature, the change trend of the oxidation induction time is consistent with the tensile strength and elongation at break. And the lifetime of EPDM O-rings calculated with OIT as performance change index is 28.6 years, which is almost the same as the tensile strength as performance change index. It proves the feasibility of using OIT as performance change index for life estimation, and the problem of life estimation for small-sized and special-shaped products can be solved.

    参考文献
    相似文献
    引证文献
引用本文

张力伟, 孙秀茹, 熊英, 郭少云.以氧化诱导期为性能变化指标推算三元乙丙橡胶O型密封圈的贮存寿命[J].高分子材料科学与工程,2021,37(10):105-111. Liwei Zhang, Xiuru Sun, Ying Xiong, Shaoyun Guo. Lifetime Estimation of EPDM O-Rings by Using Oxidation Induction Time as Performance Indicator[J]. Polymer Materials Science & Engineering,2021,37(10):105-111.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2022-01-09
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司