Abstract:The unfilled styrene butadiene rubbers (SBR) with different amounts of dicumyl peroxide (DCP) and sulfur (S) were fabricated, which have different crosslink bond types and crosslink densities. The fatigue life and failure mode of the materials under the three loading modes of tension, compression and flexion were investigated. And the influence of different loading modes on the fatigue behavior of SBR was studied. The results show that there are differences in the fatigue behavior and final failure modes of different vulcanization systems under different load modes. A low crosslink density is more beneficial to extend the tensile fatigue life, while a high crosslink density is beneficial to improve the compression fatigue life. At the same time, it is found that the tensile and compressive fatigue life of carbon-carbon cross-linked vulcanizates are relatively shorter, but their crack growth resistance is more excellent.