热拉伸温度对聚偏氟乙烯微孔膜结构与性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

中国博士后科学基金面上项目(2017M622133);山东省自然科学基金资助项目(ZR201709240128);青岛市科技计划项目青年专项(18-2-2-3-jch)


Effect of Hot-Stretching Temperature on Structure and Properties of Poly(vinylidene fluoride) Microporous Membranes
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用熔体挤出拉伸法以高、低分子量混合聚偏氟乙烯(PVDF)为原料制备微孔膜,研究了不同热拉伸温度对PVDF微孔膜表面形貌及结晶行为的影响,通过扫描电子显微镜、红外光谱仪、X射线衍射仪和差示扫描量热仪等测试手段分别对微孔膜的形态、结构、晶型进行表征。结果表明,热拉伸温度对PVDF微孔膜的成孔形貌、孔隙率、结晶度及β相含量均有影响。热拉伸温度为80 ℃时,微孔膜结晶度为58.86%,β相的相对含量最高达到42.50%,此时微孔膜的力学性能最佳;而当热拉伸温度为120 ℃时,PVDF微孔膜的成孔分布更加均匀,其孔隙率可达到最大值31.51%。

    Abstract:

    Poly(vinylidene fluoride) (PVDF) microporous membranes were fabricated via melt extrusion-stretching method (MES) using high and low molecular weight PVDF mixture as raw material. The effect of hot-stretching temperature during hot-stretch step on the surface morphology and crystallization behavior of PVDF microporous membranes were investigated by SEM, FT-IR, XRD, differential scanning calorimetry (DSC) and so on. The results indicate that hot-stretching temperature has profound influences on the pore morphology, porosity, crystallinity and content of β phase. When the stretching temperature is 80 ℃, the crystallinity of microporous membranes is 58.86%, and the relative content of β phase increases to 42.50%, the microporous membranes exhibit the best mechanical properties. When the stretching temperature rises to 120 ℃, the amount and uniformity of pores are greatly improved. The porosity of microporous membrane can reach as high as 31.51%.

    参考文献
    相似文献
    引证文献
引用本文

高志浩, 张健敏, 门树林, 温荣严, 骆 林, 戴作强.热拉伸温度对聚偏氟乙烯微孔膜结构与性能的影响[J].高分子材料科学与工程,2021,37(10):119-125. Zhihao Gao, Jianmin Zhang, Shulin Men, Rongyan Wen, Lin Luo, Zuoqiang Dai. Effect of Hot-Stretching Temperature on Structure and Properties of Poly(vinylidene fluoride) Microporous Membranes[J]. Polymer Materials Science & Engineering,2021,37(10):119-125.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2022-01-09
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司