长纤维增强聚合物注塑件翘曲变形数值模拟
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

东华理工大学博士基金(DHBK2019172);江西省新能源工艺及装备工程技术研究中心开放基金(JXNE2021-06);江西省重点研发计划(20203BBE53065)


Numerical Simulation on Warpage Deformation of Long-Fiber-Reinforced Polymer Injection-Molded Parts
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    基于长纤维增强聚合物注塑件的纤维分布,运用Mori-Tanaka复合材料性能均质化理论模型,采用耦合有限元方法,分别建立了长纤维增强聚合物材料的弹性、弹塑性本构关系,研究了材料本构对翘曲变形模拟结果的影响程度,分析了主要纤维参数对翘曲变形的影响规律。结果表明,基于弹性、弹塑性材料本构的翘曲变形形状均为“穹顶”结构,但弹塑性本构的翘曲变形更大;翘曲变形随初始纤维长度、初始纤维长径比及纤维含量的增加而减小。

    Abstract:

    Based on the fiber distribution of long-fiber-reinforced polymer injection-molded parts, the elastic and elastoplastic constitutive models of long-fiber-reinforced polymer were established by using the Mori-Tanaka homogenization theory model of composite mechanical properties. The influence of material constitutive models on the warpage deformation was studied by the coupled finite element method, and the influence of main fiber parameters on the warpage deformation was analyzed as well. The results show that both the elastic and elastoplastic constitutive models have dome-shaped structures, but the warpage deformation of the elastoplastic constitutive model is larger than that of the elastic constitutive model; with the increase of initial fiber length, the initial fiber aspect ratio, and fiber content, warpage deformation decrease accordingly.

    参考文献
    相似文献
    引证文献
引用本文

江青松, 柳和生.长纤维增强聚合物注塑件翘曲变形数值模拟[J].高分子材料科学与工程,2021,37(10):126-131. Qingsong Jiang, Hesheng Liu. Numerical Simulation on Warpage Deformation of Long-Fiber-Reinforced Polymer Injection-Molded Parts[J]. Polymer Materials Science & Engineering,2021,37(10):126-131.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2022-01-09
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司